G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Target module »DVI-CPU-MC2-UC«<br />
Connection to the central module<br />
IMPORTANT: Connect only one of the target module’s Transmission interface for<br />
each central module!<br />
NOTE: Only use category 5e (or better) twisted pair cables to connect the devices.<br />
Connecting the first central module<br />
Trans. 1|Channel 1: Connect this interface to a Dynamic Port of the first central module<br />
that is configured to connect target modules.<br />
Trans. 1|Channel 2: Connect this interface to a Dynamic Port of the first central module<br />
that is configured to connect target modules.<br />
Connecting the second central module<br />
Trans. 2|Channel 1: Connect this interface to a Dynamic Port of the second central module<br />
that is configured to connect target modules.<br />
Trans. 2|Channel 2: Connect this interface to a Dynamic Port of the second central module<br />
that is configured to connect target modules.<br />
NOTE: Note the instructions in the paragraph Connecting target modules to the central<br />
module provided in the installation guide of the matrix switch.<br />
NOTE: You can establish a direct connection between a target and a user module.<br />
Use a category 5e (or better) crossover cable to connect the modules.<br />
Power supply<br />
Power In: Insert the power pack’s connection cable to this interface.<br />
Startup<br />
Connect the power cable to the power pack and a power socket.<br />
The target module starts as soon as it is supplied with power. During startup, a multichannel<br />
configuration is created automatically (see below).<br />
17 · G&D <strong>DVICenter</strong>
Change language