G&D DVICenter - Guntermann und Drunck GmbH

Installation
Transmission
LED Out
Connecting console devices
Keyb.: Connect the PS/2 keyboard of the local console.
Mouse: Connect the PS/2 mouse of the local console.
User module »DVI-CON-12V«
NOTE: You can use either the USB or the PS/2 interfaces of the user module connect
console keyboard and mouse.
Keyb./Mouse: Connect the USB keyboard and/or USB mouse of the local console.
NOTE: You can also combine PS/2 and USB devices, for example by connecting a
USB mouse and a PS/2 keyboard.
DVI/VGA Out: Connect the monitor of the local console.
Micro In: Connect the optional microphone of the local console.
Speaker: Connect the optional speakers of the local console.
Connection to the central module
Transmission: Use a category 5e (or better) twisted pair cable to connect the Transmission
interfaces of the individual user modules to a Dynamic Port, which is configured
for connecting a user module.
NOTE: Please also refer to the instructions in the paragraph Connecting user modules
to the central module in the installation guide of the matrix switch.
NOTE: You can establish a direct connection between a target and a user module.
Use a category 5e (or better) crossover cable to connect the modules.
Mouse
DVI/VGA Out Micro In Speaker Keyb./Mouse Keyb. Red. Power
Main Power
G&D DVICenter · 58