08.09.2013 Aufrufe

Sony XAV-W1 Car Radio OWNER'S MANUAL Operating Instructions ...

Sony XAV-W1 Car Radio OWNER'S MANUAL Operating Instructions ...

Sony XAV-W1 Car Radio OWNER'S MANUAL Operating Instructions ...

MEHR ANZEIGEN
WENIGER ANZEIGEN

Erfolgreiche ePaper selbst erstellen

Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.

22<br />

For DVD<br />

1 During playback, touch “DVD<br />

CONTROL.”<br />

2 Touch “Audio” repeatedly until the<br />

desired audio language/format<br />

appears.<br />

Audio language<br />

Audio format/channel numbers*<br />

The audio language switches among the<br />

available languages.<br />

When the 4-digit input prompt appears, input<br />

the language code (page 63) for the desired<br />

language.<br />

When the same language is displayed two or<br />

more times, the disc is recorded in multiple<br />

audio formats.<br />

* The format name and channel numbers appear as<br />

follows.<br />

Example: Dolby Digital 5.1 ch<br />

Dolby D 3 / 2 . 1<br />

Front component × 2 +<br />

Center component × 1<br />

Rear component × 2<br />

LFE component × 1<br />

To close the DVD control menu, touch “DVD<br />

CONTROL.”<br />

For DivX ®<br />

1 During playback, touch “PLAY MODE,”<br />

then touch “Audio” repeatedly until<br />

the desired audio format appears.<br />

To close the play mode menu, touch “PLAY<br />

MODE.”<br />

Changing the audio channel<br />

When playing VCD/CD/MP3/WMA, you can<br />

select the right or left channel sound to listen<br />

through both right and left speakers.<br />

The options are indicated below.<br />

Stereo: Standard stereo sound (default)<br />

1/Left: Left channel sound (monaural)<br />

2/Right: Right channel sound (monaural)<br />

For VCD<br />

1 During playback, touch “PLAY MODE,”<br />

then touch “Sound” repeatedly until<br />

the desired audio channel appears.<br />

Audio channel<br />

To close the play mode menu, touch “PLAY<br />

MODE.”<br />

For CD/MP3/WMA<br />

1 During playback, press (AUDIO) on the<br />

card remote commander repeatedly<br />

until the desired audio channel<br />

appears.<br />

Note<br />

You may not be able to change the audio setting<br />

depending on the disc.<br />

Tip<br />

The operation by the card remote commander<br />

(pressing (AUDIO) repeatedly) is also available for<br />

video discs.<br />

Adjusting the audio output level<br />

— DVD level<br />

The audio output level differs depending on the<br />

recorded format. To reduce the volume level<br />

differences between disc and source, you can<br />

adjust audio output level according to the<br />

recorded format. The default level is set for PCM<br />

format, and the level for Dolby Digital and DTS<br />

format can be adjusted separately from the<br />

default level.

Hurra! Ihre Datei wurde hochgeladen und ist bereit für die Veröffentlichung.

Erfolgreich gespeichert!

Leider ist etwas schief gelaufen!