Sony XAV-W1 Car Radio OWNER'S MANUAL Operating Instructions ...

36
Setting the background screen
The background screen can be displayed during
audio playback. You can select from 3 types
(“Screen1,” “Screen2,” or “Screen3”), each of
which consists of a wallpaper and spectrum
analyzer pattern.
The navigation display (“Navigation”) can also
be selected as the background screen, if a
navigation device is connected and “Input” is set
to “Navigation” (page 45).
1 Touch “SETUP,” then the “Screen” tab.
The “Screen Setting 1” display appears.
2 Touch “Screen.”
The options appear.
3 Touch the desired option.
To return to the previous display, touch .
To close the setup menu, touch “SETUP.”
Tip
If “Screen” is assigned to (CSTM) on the main unit,
press it repeatedly to switch the background screen.
For details on how to assign the function on (CSTM),
see page 44.
Setting the wallpaper and
spectrum analyzer pattern
You can change the wallpaper and spectrum
analyzer pattern set in “Screen1,” “Screen2,” and
“Screen3.”
The wallpaper options are indicated below.
Wallpaper1 – 4: Pre-stored images.
User1 – 4: Captured images (page 37).
All: Displays all pre-stored images and captured
images in sequence.
User All: Displays all captured images in
sequence.
1 Touch “SETUP,” the “Screen” tab, then
“Screen.”
2 Touch “Screen1,” “Screen2,” or
“Screen3” on which you want to store
the new setting.
3 Touch “Edit.”
The “Wallpaper Select” display appears.
4 Touch the desired wallpaper, then
“OK.”
To scroll the options, touch “Prev v” or
“Next V.”
5 Touch the desired spectrum analyzer
pattern, then “OK.”
Select “OFF” to deactivate the spectrum
analyzer.
The new setting is stored on the selected
option.
The new setting is applied when you touch
“SETUP” to close the setup menu.
To return to the previous display, touch .
To close the setup menu, touch “SETUP.”