Sony XAV-W1 Car Radio OWNER'S MANUAL Operating Instructions ...

Note
You cannot use this function in countries/regions
where no PTY data is available.
Setting CT
1 Set “CT ON” in setup (page 43).
Notes
The CT function may not work even though an RDS
station is being received.
There might be a difference between the time set by
the CT function and the actual time.
Sound Settings
Selecting the sound quality
— EQ7
You can select an equalizer curve from 7 music
types (Xplod, Vocal, Edge, Cruise, Space,
Gravity, and Custom).
1 During playback/reception, touch
“SETUP,” then the “Sound” tab.
The “Sound Setting” display appears.
2 Touch “EQ7.”
The options appear.
3 Touch the desired equalizer curve.
The setting is complete.
To cancel the equalizer curve, select “OFF.”
To return to the previous display, touch .
To close the setup menu, touch “SETUP.”
Notes
EQ7 is not selectable while the karaoke mode
(page 26), Zone × Zone (page 26) is activated, or
“Super Audio CD Mode” is set to “High Quality”
(page 28).
When EQ7 is activated, CSO is switched to “OFF”
(page 34).
Tip
If “EQ7” is assigned to (CSTM) on the main unit, press
it repeatedly to select the equalizer curve. For details
on how to assign the function on (CSTM), see
page 44.
31