Sony XAV-W1 Car Radio OWNER'S MANUAL Operating Instructions ...

50
Setting the security code
Number
buttons
CLEAR
This unit has a security function to discourage
theft. Enter a 4-digit number as your security
code.
Once the security function is activated, you need
to enter the security code to turn on the unit after
re-installing the unit in another car or charging
the battery.
Activating the security function
1 Touch “SETUP,” then the “System”
tab.
The “System Setting” display appears.
2 Touch “Security Control.”
The security code setting display appears.
3 Press the number buttons on the card
remote commander to enter the
security code.
4 To confirm, press the number buttons
to reenter the security code.
The setting is complete.
The 4-digit input prompt appears when you turn
on the unit after re-installing in another car or
charging the battery. Touch the number keys to
enter your security code.
To delete an entered number, press (CLEAR) on
the card remote commander.
To return to the previous display, touch .
To close the setup menu, touch “SETUP.”
Deactivating the security function
1 Repeat steps 1 to 2 above.
The security unlock display appears.
2 Touch the number keys to enter your
security code.
The confirmation display appears.
3 Touch “Yes.”
“Security canceled.” appears, and the security
function is deactivated.
To delete an entered number, touch “Clear.”
To return to the previous display, touch .
To close the setup menu, touch “SETUP.”
Setting the clock
The clock uses a 24-hour indication.
1 Touch “SETUP,” then the “System”
tab.
The “System Setting” display appears.
2 Touch “Clock Adjust.”
The setting display appears.
3 Set the hour and minute.
For example, to set to 8:30, touch “0830.”
4 Touch “Start.”
The setting is complete.
To delete an entered number, touch “Clear.”
To return to the previous display, touch .
To close the setup menu, touch “SETUP.”