catena cta1-v2/cta2-v2 / brick bra1-v2 / closed cla-v2 - Spectral

System description
The virtual surround systems CTA1/2 / BRA1 / CLA1 creates a rich and full sound
field that is normally only possible with 5.1 Systems.To achieve this sound quality
the individual channels of a multi-channel recording are put through a special
frequency-specific process and mixed onto two channels, which then creates
the impression of surround sound in the room. The result is outstanding listening
pleasure for minimum installation costs. The systems have an integrated, RDSenabled
FM Tuner and adaptive remote control, which can be used to control a
second listening zone (Multiroom).
Pack contents virtual surround system CTA1 / BRA1:
1) One Speaker-Amplifier-Modul with integrated audio receiver
(including FM tuner)
2) One multi signal cable
3) One aerial for VHF reception
4) One throw-out antenna for FM reception
5) One mains cable for the power supply of the Amplifier-Modul
6) One display-supported and easy to operate universal remote control
7) Three batteries (LR03 AAA 1,5V) for the remote control
Pack contents virtual surround system CLA1:
1) One Amplifier-Modul with integrated audio receiver (including a FM tuner)
2) Two satellit speakers
3) One signal cable
4) One set loudspeaker cable for connecting the Amplifier-Modul
with the satellites
5) One mains cable for the power supply of the Amplifier-Modul
6) One throw-out antenna for FM reception
7) One aerial for VHF reception
8) One display-supported and easy to operate universal remote control
9) Three batteries (LR03 AAA 1,5V) for the remote control.
36
PACK CONTENTS VIRTUAL SURROUND SYSTEM CTA2:
1) One active subwoofer (CTA2-Amp) with integrated audio receiver
(including an FM tuner)
2) One passive subwoofer (CTA2-Sub)
3) Two satellite speakers (CTA2-Sat)
4) One multi signal cable
5) One set loudspeaker cable for connecting the Amplifier-Modul with
the satellites and subwoofer
6) One mains cable for the power supply of the Amplifier-Modul
7) One throw-out antenna for FM reception
8) One aerial for VHF reception
9) One display-supported and easy to operate universal remote control
10) Three batteries (LR03 AAA 1,5V) for the remote control
Positioning the system
Insert the sound system into the CT cabinets (CT1F, CT3F or CT3F2) or into the
Brick sound base. Then mount the cover.
The CLA1 system is already inserted in the furniture.
CTA1: The CTA1 system should be placed directly under the TV.
CTA2: For perfect surround sound the satellite speakers should be placed
left and right at the furniture. The subwoofer should be placed
below or in the middle of the furniture.
BRA1: The BRA1 system should be placed into the BRICK sound base.
CLA1: At the backside of the loudspeakers are bass reflex holes that emit
rearwards. For achieving a perfect sound the system should be placed
with a minimum distance of 5 cm to the wall.