1993_Motorola_Linear_Interface_ICs_Vol_2.pdf

MC10322
ELECTRICAL CHARACTERISTICS (TA = 25'C, I ref = 1.115 mA, load =37.5010 AGnd, VCC = + 5.0 V, VEE =-5.2V, see Figure 1.)
I Characteristic I Symbol I Min I 'iYP I Max I Unit
TRANSFER CHARACTERISTICS
Resolution Res 8.0 8.0
Integral Nonlinearity INl -1/2 0
Differen1ial Nonlinearity DNl -1/2 0
Monotonicity - Guaranteed'
Differential Gain
Differen1ial Phase
DG
DP
-
1.0
0.5
OUTPUTS
Output Current at Out - (Control Inputs = 0 Except as Noted)
Enhanced White (FH = BRT = 1) IEH- 0
Normal White (FH = 1 or DO - 07 = 1) INW- 1.75
Normal Black (DO - 07 = 0) Referred to Normal White INB- 16.6
Blank Referred to Normal Black (BlK = 1) IBlN- 1.32
Sync Referred to Blank (SYNC = 1) ISYNC- 7.1
Output Voltage at Out - (Control Inputs = 0 Except as Noted)
Enhanced White (FH.= BRT = 1) VEH- 0
Normal White (FH = 1 or DO - 07 = 1) VNW- -67.8
Normal Black (DO - 07 = 0) Referred to Normal White VNB- -626
Blank Referred to Normal Black (BlK = 1) VBlN- -SO.6
Sync Referred to Blank (SYNC = 1) VSYNC- -270
Output Current at Out + (Control Inputs = 0 Except as Noted)
Enhanced White (FH = BRT = 1) IEH+ 26.8
Normal White (FH = 1 or DO - 07 = 1) INW+ 25
Normal Black (DO - 07 = 0) Referred to Normal White INB+ -16.6
Blank Referred to Normal Black (BlK = 1) IBlN+ -1.32
Sync Referred to Blank (SYNC = 1) ISYNC+ -7.1
Output Voltage at Out + (Control Inputs = 0 Except as Noted)
Enhanced White (FH = BRT = 1) VEH+ -1016
Normal White (FH = 1 or DO - 07 = 1) VNW+ -949
Normal Black (DO - 07 = 0) Referred to Normal White VNB+ 626
Blank Referred to Normal Black (BlK = 1) VBlN+ 50.6
Sync Referred to Blank (SYNC = 1) VSYNC+ 270
Output Matching ( IINB + I -IINB -I ) IFSER -50
Gain Error (Gray Scale at Out -) GER -50
Output Impedance (Gray Scale, -1.7 V < Vo < 0.3 V) Zo 25
Output CapaCitance Co -
Glitch Energy (Clocked Mode)
At Midscale Transition (DO - 07 = ,27 ... ,28) EGM -
Due to Clock Feedthrough (DO - 07 = Constant) EGC -
Due to Data Feedthrough (Clock = Constant) EGO -
Peak Glitch Current (Clocked Mode)
At Midscale Transition (DO - 07 = ,27 ... ,28) IGM -
Due to Clock Feedthrough (DO - 07 = Constant) IGC -
Due to Data Feedthrough (Clock = Constant) IGD -
POWER SUPPUES
Supply Current
(VCC = + 5.5 V) ICC -
(VEE =-5.72 V,lref= 1.115 mAl lEE -55
Power Dissipation Po -
Power Supply Sensitivity at Outputs
(VEE =-5.2 V, 4.5< VCC < 5.5 V) PSSD -25
(VCC = + 5.0 V,-5.72