1993_Motorola_Linear_Interface_ICs_Vol_2.pdf

MC1472
ELECTRICAL CHARACTERISTICS (Unless otherwise noted minimax limits apply across the O°C to 70°C temperature range
with 4.5 V '" VCC '" 5.5 V. All typical values are for TA = 25°C, VCC = 5.0 Volts.)
Characteristic Symbol Min Typ Max Unit
Input Voltage - High Logic State VIH 2.0 - 5.5 Vdc
Input Voltage - Low Logic State VIL 0 - 0.8 Vdc
Input Current - Low Logic State IlL mA
(VIL = 0.4 V)
A Input - - -0.3
B Input -0.15
Input Current - High Logic State IIH pA
(VIH = 2.4 V)
A Input - - 40
B Input - - 20
(VIH = 5.5 V)
A Input - - 200
B Input - - 100
Input Clamp Voltage VIK V
(Icc = -12 mAl - - -1.5
Output Leakage Current - High Logic State IOH pA
(VO = 70 V, See Test Figure) - 100
Output Voltage - Low Logic State VOL V
(lQL = 100 mAl - - 0.4
(lQL = 300 mAl - - 0.7
Output Clamp Diode Leakage Current IOC V
(VC = 70 V, See Test Figure) - - 100
Output Clamp Forward Voltage VFC V
(lFC = 300 mA, See Test Figure) - - 1.7
Power Supply Current ICC mA
(All Inputs at VIH) - - 70
(All Inputs at VIL) - - 15
NOTE: All currents into device pins are shown as positive, out of device pins as negative. All voltages referenced to ground unless otherwise
noted.
SWITCHING CHARACTERISTICS Vee = 5.0V, TA = 250 e
Propagation Delay Time
Output High to Low
Output Low to High
Output Transition Time
Output High to Low
Output Low to High
Characteristic Symbol Min
tpHL -
tpLH -
tTHL -
tTLH -
MOTOROLA LINEAR/INTERFACE ICs DEVICE DATA
7-42
Typ Max Unit
- 1.0 /.IS
- 0.75
- 0.1 /.IS
- 0.1