1993_Motorola_Linear_Interface_ICs_Vol_2.pdf

MAXIMUM RATINGS
MC3391
Rating Symbol Value Unit
Input Voltage Range Vin -0.5 to +6.5 V
Output Transient Breakdown Voltage - Forward VBF +60 V
-Reverse VBR -80
Short Circuit Current ISC 2.0 A
Output Avalanche Energy Emax 60 mJ
Minimum ESD Voltage Capability (Note 1 ) ESD 2000 V
Operating Junction Temperature TJ 150 °c
Internally Limited (Note 2)
Storage Temperature Tstg -65 to +150 °c
Operating Ambient Temperature Range TA -40 to +125 °c
Thermal Resistance (Notes 3, 4) °C/W
TO-220 - Junction to Ambient 6JA 62.5
- Junction to Case 6JC 2.5
SOIC - Junction to Ambient 6JA 118
- Junction to Case 6JC 59
ELECTRICAL CHARACTERISTICS (Limit values are noted under conditions: -40°C :s; TA :s; + 125°C, 'Typical' denotes calculated mean
value derived from 25°C parametric data, unless otherwise noted.)
Characteristics Figure Symbol Min Typ Max Unit
Input Control Current 3 lin IlA
Vin= 1.0V - 0.2 10
Vin=4.0V - 230 350
Vin=5.0V - 260 500
Input Voltage High (ON) 7 VIH 4.0 2.0 - V
Input Voltage Low (OFF) VIL - 2.0 1.0
Output Leakage Current 4 IL
+VS = 28 V, RL = 0 - 1.3 100
Output Short Circuit Current 5 ISC A
+VS = 14 V, RL = 0 1.0 1.3 2.2
Output ON Voltage (Vin = 4.0 V, Note 5) 6 VOL V
10=400 rnA - 0.95 1.1
10=800 rnA - 1.1 1.8
Output Clamp Voltage 8 VOC V
10=100mA 60 70 80
Reverse Leakage Current 9 IBR nA
VO=-13V - -10 -30
Fault Output Sink Saturation (lsink = 100 J.LA, Yin = 5.0 V) 10 VDS(sat) - 0.3 0.4 V
Fault Output Off-State Leakage (VDS = 5.0 V) IDS(peak) - 0.6 100 IlA
Turn-On lime 11 tr Ils
10% to 90% of 10 (400 rnA nominal) - 3.3 20
Turn-Off lime 12 tf
90% to 10% of 10 (400 rnA nominal) - 9.7 25
Propagation Delay lime - Icj
(Turn-on, Turn-off) - 3.0 10
NOTES: 1. ESD testing performed in accordance with Human Body Model (CZap = 100 pF, RZap = 1500 0).
2. Thisdeviceincorporatesinternalcircuittechniqueswhichdonotallowtheinternaljunctiontemperaturetoreachdestructivetemperatures.
3. The thermal resistance case is considered to be a point located near the center of the tab and plastic body of the TO-220 or a point on
one of the heatsink leads (Pins 9 to 16) of the SOIC.
4. The SOIC thermal information is based on simulation data.
5. 10 is defined as the output sink current.
MOTOROLA LINEAR/INTERFACE ICs DEVICE DATA
10-16