DIGITAL RESEARCH(r) CP/M Plus TM (CP/M Version 3) Operating ...

The SET Command CP/M 3 User's Guide
Table 5-16. (continued)
Option Meaning
ARCHIVE=OFF Sets the archive attribute to off. This means
that the file has not been backed up (archived).
PIP with the [A] option can copy files with
the archive attribute set to OFF. PIP with this
option requires an ambiguous filespec and
copies only files that have been created or
changed since the last time they were backed
up with the PIP[A] option. PIP then sets the
archive attribute to ON for each file successfully
copied.
ARCHIVE=ON Sets the archive attribute to on. This means
that the file has been backed up (archived).
The archive attribute can be turned on
explicitly by the SET command, or it can be
turned on by PIP when copying a group of
files with the PIP [A] option. The archive
attribute is displayed by DIR.
Fl = ON|OFF Turns on or off the user-definable file attribute
Fl.
F2 = ON|OFF Turns on or off the user-definable file attribute
F2.
F3 = ON|OFF Turns on or off the user-definable file attribute
F3.
F4 = ON|OFF Turns on or off the user-definable file attribute
F4.
Example: A >SET MYFILE.TEX[RO SYS]
The preceding command sets MYFILE.TEX to Read-Only and System.
5-87