DIGITAL RESEARCH(r) CP/M Plus TM (CP/M Version 3) Operating ...

The SET Command CP/M 3 User's Guide
Example: A>SET[DEFAULT=dd]
The preceding command instructs the system to use dd as a password
if you do not enter a password for a password-protected file.
Set Time Stamp Options on Disk
Syntax: SET [CREATE= ON]
SET [ACCESS= ON]
SET [UPDATE= ON]
Explanation: The preceding SET commands allow you to keep a record of the time
and date of file creation and update, or of the last access and update of
your files.
[CREATE ON] turns on CREATE time stamps on the disk in
the default drive. To record the creation time
of a file, the CREATE option must have been
turned on before the file is created.
[ACCESS = ON] turns on ACCESS time stamps on the disk in
the default drive. ACCESS and CREATE
options are mutually exclusive. This means that
only one can be in effect at a time. If you turn
on the ACCESS time stamp on a disk that has
the CREATE time stamp, the CREATE time
stamp is automatically turned off.
[UPDATE = ON] turns on UPDATE time stamps on the disk in
the default drive. UPDATE time stamps record
the time the file was last modified.
To enable time stamping', you must first run INITDIR to format the
disk directory for time and date stamping.
Although there are three kinds of date/time stamps, only two date/time
stamps can be associated with a given file at one time. You can choose
to have either a CREATE date or an ACCESS date for files on a particular
disk.
5-92