1747-6.5.5, SL 500 DeviceNet Scanner Module User Manual

More documents

Recommendations

Info

E-2 Configuring SLC 5/05 Ethernet Communications Publication 1747-6.5.5 - August 2000 The Channel Configuration window will open. 3. Select the Chan 1 - System tab. 4. Make sure the BOOTP Enable box is not checked (i.e., disable BootP). 5. Enter your processor’s unique IP address in the space provided. We used 130.130.130.2 for the example application. IMPORTANT You must enter the same IP Address when you configure the Ethernet to PLC-5/SLC-5/5820-EI driver in RSLinx (see page 5-5).
6. Leave the Subnet Mask at the default value. Configuring SLC 5/05 Ethernet Communications E-3 The Hardware Address is filled in by the software. 7. Click on the Apply button and then on OK. The new Channel Configuration will be applied to the processor. TIP You can also download the channel configuration to your processor along with the example application program in chapter 6. Publication 1747-6.5.5 - August 2000
Page 1 and 2:
SLC 500 DeviceNet Scanner Module 17
Page 3:
European Communities (EC) Directive
Page 6 and 7:
P-2 About This User Manual Contents
Page 8 and 9:
P-4 About This User Manual Common T
Page 10 and 11:
P-6 About This User Manual Terminol
Page 12 and 13:
P-8 About This User Manual Publicat
Page 14 and 15:
Table of Contents ii Configuring th
Page 16 and 17:
Table of Contents iv Installing and
Page 18 and 19:
1-2 Before You Begin What Your 1747
Page 20 and 21:
1-4 Before You Begin Target Device
Page 22 and 23:
1-6 Before You Begin Publication 17
Page 24 and 25:
1-8 Before You Begin What 1747-SDN
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
2-2 Planning Your Configuration and
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
3-2 Hardware Setup Installing the S
Page 40 and 41:
3-4 Hardware Setup Publication 1747
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
3-14 Hardware Setup Installing the
Page 52 and 53:
Page 54 and 55:
4-2 Configuring the DeviceNet Netwo
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
4-10 Configuring the DeviceNet Netw
Page 64 and 65:
4-12 Configuring the DeviceNet Netw
Page 66 and 67: 4-14 Configuring the DeviceNet Netw
Page 68 and 69: 4-16 Configuring the DeviceNet Netw
Page 70 and 71: 5-2 Communicating with DeviceNet fr
Page 78 and 79: 5-10 Communicating with DeviceNet f
Page 88 and 89: 6-2 Creating and Running the Exampl
Page 96 and 97: 6-10 Creating and Running the Examp
Page 98 and 99: 7-2 Troubleshooting Network Status
Page 100 and 101: 7-4 Troubleshooting Publication 174
Page 102 and 103: A-2 Data Map Example Publication 17
Page 104 and 105: A-4 Data Map Example Example Output
Page 106 and 107: A-6 Data Map Example Publication 17
Page 108 and 109: B-2 Configuring the M0/M1 Files Usi
Page 110 and 111: C-2 Configuring the Processor’s R
Page 112 and 113: C-4 Configuring the Processor’s R
Page 114 and 115: D-2 Configuring DH+ Communications
Page 118 and 119: E-4 Configuring SLC 5/05 Ethernet C
Page 120 and 121: F-2 Configuring the SLC 500 Process
Page 126 and 127: G-2 Installing and Configuring the
Page 128 and 129: G-4 Installing and Configuring the
Page 130 and 131: H-2 Installing and Configuring the
Page 132 and 133: H-4 Installing and Configuring the
Page 134 and 135: 2 Index SLC 500 processor 3-2 to 3-
Page 136: Other Comments PLEASE FOLD HERE BUS
Page 139: SLC500 DeviceNet Scanner Module Use
show all

1747-6.5.5, SL 500 DeviceNet Scanner Module User Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?