1747-6.5.5, SL 500 DeviceNet Scanner Module User Manual

4-12 Configuring the DeviceNet Network
Publication 1747-6.5.5 - August 2000
2. Make sure that the Polled box is checked and that the Rx Size and
Tx Size are each 1 byte.
3. Click on OK to close the Edit I/O Parameters window for the
RediSTATION.
4. Click on OK again. You will be prompted to download the changes
to the 1747-SDN module.
5. Click on Yes to download the new configuration.
AutoMapping the Devices into the Scanlist
Follow the procedure below to automatically map the photoeye and
RediSTATION to the SLC 500 processor.
TIP
If you want to know how to map the devices
manually, click on the Help button at the bottom of
the screen and select “Map device input data
manually”.
1. Double-click on the 1747-SDN module icon and select the Input
tab.