21 TRV Fireplace - Lopi
21 TRV Fireplace - Lopi
21 TRV Fireplace - Lopi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
26 Installation (for qualified installers only)<br />
Diffuser Plate Adjustment<br />
Certain vent configurations require the diffuser plate to be adjusted (refer to the approved vent<br />
configuration charts for details). Position # 1 is stock (flat). Position # 2 is bent. See the directions below<br />
to change the diffuser to position #2.<br />
If the diffuser is required to be in position # 2, you may wish to adjust the diffuser while converting the<br />
appliance to rear-vent configuration.<br />
DIFFUSER SIDE VIEW<br />
Before (Stock - Position # 1)<br />
After (Position # 2)<br />
<br />
<br />
Firebox Roof<br />
Back Wall of Firebox<br />
NOTE: To better<br />
access the diffuser,<br />
you may wish to move<br />
the restrictor to the # 1<br />
postion.<br />
Remove the diffuser.<br />
Bend the round portion of the<br />
diffuser 90° (position # 1).<br />
Secure the diffuser plate<br />
with the screws<br />
removed earlier.<br />
© Travis Industries 4080207 100-01185_000