21 TRV Fireplace - Lopi
21 TRV Fireplace - Lopi
21 TRV Fireplace - Lopi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
46 Optional Equipment (for qualified installers only)<br />
LP Conversion Instructions<br />
Install the conversion kit prior to installing the gas line to ensure proper gas use.<br />
1 Remove the glass (see page 41). Remove the logs and coals (if installed - page 43)<br />
2 Remove the burner (see illustration below).<br />
<br />
b <br />
<br />
Lift up on the left<br />
side of the burner,<br />
then slide the<br />
burner to the left<br />
and up to remove.<br />
Burner Replacement:<br />
Make sure the orifice on the firebox<br />
floor inserts into the fitting on the<br />
bottom of the burner.<br />
The mixing tube slides<br />
onto the orifice.<br />
Lift the pilot hood off the pilot<br />
assembly (you may need to<br />
pull hard to remove).<br />
© Travis Industries 4080207 100-01185_000<br />
a<br />
After replacing the burner<br />
re-attach the pilot hood.<br />
<br />
<br />
Before replacing the burner, slide the<br />
air control all the way to the right.<br />
Make sure the burner is fully seated and pilot hood lines up with the<br />
burner holes at the rear edge of theburner.