2000 by the National Roofing Contractors Association. No

ASPHALT SHINGLE WARRANTIES
1. Identity of issuing entity Tamko Roofing Products, Inc. Tamko Roofing Products, Inc.
2. Title, original publication date, and
identifying symbol, if any
“Storm Fighter AR Category 3 Hurricane/130 MPH Wind Shingle Limited
Warranty;” January 1, 1998; JP39942 3/99
Tamko Roofing Products, Inc. Metric Laminated Shingles Limited
Warranty ; April 15, 1999; 997528 JP28994
3. Products covered Stormfighter AR shingles Heritage M40, Heritage M30, Heritage M25
4. Scope of coverage
4a. Does the warranty provide coverage for
defects in manufacture?
4b. Does the warranty provide coverage for
defects in application?
4c. Does the warranty limit coverage to
leakage and, if no, what defects or
conditions other than leakage are
covered?
4d. Does the warranty provide coverage for
flashings, metal work, or related work that
may be affected and/or need to be
repaired or removed?
5. Length of Coverage
Tamko warrants that the Tamko shingles are free from manufacturing defects
which directly result in leaks and will be resistant to certain algae or fungus
growth, including blue-green algae of the Genus Gloecapsa to the extent such
growth damages appearance.
Yes
No
Yes
No
For Manufacturing Defects: 30 years
For Algae Resistance: 10 years
5a. Is the warranty prorated? Yes Yes
Tamko warrants that the Tamko shingles are free from manufacturing
defects that result in leaks.
Yes
No
Yes
No
40 years: Heritage M40
30 years: Heritage M30
25 years: Heritage M25
5b. When does prorating begin? After one year After one year
5c. What is the prorating formula?
6. Nature of Remedy
6a. Does the warranty provide for furnishing
of replacement shingles?
6b. Does the warranty provide for labor to
install replacement shingles?
6c. Does the warranty provide for labor to
remove defective shingles?
6d. Does the warranty cover disposal of
defective shingles?
6e. Does the warranty apply to any materials
other than shingles?
7. Is there a monetary limitation?
8. Specific Exclusions from Coverage (See
Warranty Introduction for codes.)
After one year, warranty is reduced by 1/360 for each month of service
from date of installation.
For manufacturing defects and not wind damage, Tamko will refund to the
owner, subject to proration, the original installed cost of the shingles, except that
Tamko, in its sole discretion, may make repairs or cause repairs to be made, or
may replace defective shingles, exclusive of flashings and metal work, as
required to prevent leaks resulting solely from manufacturing defects. Tamko will
have ninety days after receipt of notification to make or cause to be made
necessary refunds, repairs or replacements unless otherwise prevented by acts
of God.
For algae resistance, Tamko will refund to the owner, subject to proration, the
original installed cost of the shingles, except that Tamko, in its sole discretion,
may either make repairs or cause repairs to be made to the shingles, which may
include cleaning or replacing the shingles, exclusive of flashings and metal work,
as required to correct the damage to the appearance of the shingles.
Yes Yes
No Yes
No No
No No
No No
During the first year, Tamko’s maximum liability shall be limited to the original
installed cost of the Tamko shingles. The original installed cost shall be the
actual original cost of purchase and application of the Stormfighter AR shingles
which shall be evidenced by the owner’s written proof of purchase and
installation. After one year, Tamko’s maximum liability shall be prorated and shall
be equal to the product of: (1) the quotient derived by dividing the original
installed cost by the total months of the warranty period, multiplied by (2) the
difference between the total months of the warranty period minus the total months
of service (the number of months from the date of original application to the date
of the warranty claim). The remaining cost shall be the responsibility of the
owner. For shingles damaged by algae or fungus growth to which shingles are
warranted to be resistant, Tamko will refund to the owner the original installed
cost of the shingles, except that Tamko, in its sole discretion, may either make
repairs or cause repairs to be made or replace damaged shingles.
1, 2, 4, 7, 8, 9, 14 (green algae, moss and staining from overhanging trees), 17,
18 (including aliphatic or aromatic solvents, chlorinated hydrocarbons, turpentine,
oils, or organic or inorganic polar materials), 19, 23, 24. Warranty also excludes
Heritage M40: After one year, warranty is reduced by 1/480 for each month of
service from date of installation (so that at the beginning of the second year,
warranty would be reduced by 12/480).
Heritage M30: After one year, warranty is reduced by 1/360 for each month of
service from date of installation (so that at the beginning of the second year,
warranty would be reduced by 12/360).
Heritage M25: After one year, warranty is reduced by 1/300 for each month of
service from date of installation (so that at the beginning of the second year,
warranty would be reduced by 12/300).
For manufacturing defects, Tamko will make repairs or cause repairs to
be made, or will replace defective shingles, exclusive of flashings and
metal work, as required to prevent leaks resulting directly and solely
from manufacturing defects. Tamko will have 90 days after receipt of
notification to make or cause to be made repairs or replacements unless
otherwise prevented by acts of God.
During the first year, Tamko's maximum liability for manufacturing
defects shall be limited to the reasonable replacement cost of the Tamko
shingles and their application. After one year, Tamko's maximum
liability shall be prorated and shall be equal to the product of: (1) the
quotient derived by dividing the reasonable replacement cost by the total
months of the warranty period multiplied by (2) the difference between
the total months of the warranty period minus the total months of service
(the number of months from the date of the original application to the
date of repair or replacement of the shingles).
1, 2, 4, 7, 8, 9, 14, 17, 18 (including aliphatic or aromatic solvents,
chlorinated hydrocarbons, turpentine, oils, or organic or inorganic polar
104