2000 by the National Roofing Contractors Association. No

Metal Panels
1. COMPANY NAME MBCI MBCI
2. PRODUCT NAME CRAFTSMAN SERIES "SB" PROFILE CRAFTSMAN "LB" PROFILE
3 CONFIGURATION
3.1 STYLE
A. Simulated Shingle (specific type if applicable)
B. Simulated Shake (specific type if applicable)
C. Simulated Slate (specific type if applicable)
D. Simulated Tile (specific type if applicable)
E. Other (specify type) STANDING SEAM: SEPARATE PAN AND BATTEN STANDING SEAM: SEPARATE PAN AND BATTEN
3.2 COMPONENT TYPE AND SIZE
A. Panel [width (in.), maximum length (ft.)] 12, 16-1/2 X 40 12, 16-1/2 X 40
B. Individual (dimensions: inches x inches)
3.3 MATERIALS, THICKNESSES, AND FINISHES
GALVANIZED STEEL (ga.): Thicknesses
Finishes
STAINLESS STEEL (ga.) Thicknesses
Finishes
GALVALUME (ga.) Thicknesses 22, 24, 26 22, 24, 26
Finishes BARE-SIGNATURE SERIES 200,300, 300 METALLIC BARE-SIGNATURE SERIES 200,300, 300 METALLIC
ALUMINIZED STEEL (ga.) Thicknesses
Finishes
ALUMINUM (in.) Thicknesses
Finishes
COPPER (oz.) Thicknesses
Finishes
TERNE METAL (ga.) Thicknesses
Finishes
ZINC (ga.) Thicknesses
Finishes
4. SYSTEMS RECOMMENDATIONS
Min. Slope Recommended In Normal Application (in. per ft.) 3:12 3:12
Min. Slope Recommended In Special Application (in. per ft.) 3:12 3:12
DECK TYPES'
Solid Deck, Wood X X
Spaced Sheathing, Wood
Decking Not Required
Underlayment Recommended (type or NA) 30 LB. FELT 30 LB. FELT
5. PANEL CONFIGURATION (For components in item 3.2A
above; for individual components, see item 6.)
5.1 INTERLOCKING METHOD, HEIGHT (inches), AND SEAM SEALANT HEIGHT (inches) / SEAM SEALANT (F = Factory HEIGHT (inches) / SEAM SEALANT (F = Factory
Applied; E = Field applied; N = None) Applied; E = Field applied; N = None)
Overlapped
Interlocked
Slip Locked
Snap Together 1 / F 2 / F
5.2 FASTENING METHOD
Through Fastened (exposed or concealed, specify)
Clip (exposed or concealed, specify) CONCEALED CONCEALED
6. INDIVIDUAL COMPONENT CONFIGURATION (For components
in item 3.2B above; for panels, see item 5.)
6.1 DIMENSIONS
Weight Per Roof Square (pounds)
Exposure (inches)
Coverage (approx. no. of pieces per square at listed exposure)
6.2 INSTALLATION PROCESSING
Through-Fastened (exposed or concealed, specify)
Kind(s) Of Fastener Required (nails, staples, screws, NA)
Number Of Fasteners Per Piece (number or NA)
Seam Snap-In Or Interlock (specify or NA)
Adhesive/Sealant Required (yes/no)
Support Battens Required (yes/no)
7. MANUFACTURER/PRODUCT DATA
Year Product First Sold 1983 1983
Number of Squares Installed -- --
Method Of Distribution (distributors, direct) DIRECT DIRECT
Number Of Rgional Service Locations 21 21
Licensed Applicator Agreement (yes/no) NO NO
For Sales Information, Contact W. DICKINSON W. DICKINSON
For Technical Information, Contact T. WOLFE T. WOLFE
8. ASTM E331 WATER INFILTRATION TEST RESULTS 4 PSF - LEAKAGE RATE / NONE 4 PSF - LEAKAGE RATE / NONE
9. ASTM E283 AIR INFILTRATION TEST RESULTS 4 PSF - LEAKAGE RATE / 0.035 4 PSF - LEAKAGE RATE / 0.035
(16-1/2"), 0.048 (12") (16-1/2"), 0.048 (12")
10. UL FIRE RATINGS FOR ANY SPECIFICATION (per UL 790) -- --
11. FM/UL WIND UPLIFT RATING FOR ANY SPECIFICATION UL-90 UL-90
12. SEE APPENDIX IF CHECKED
NA=not applicable
176