2000 by the National Roofing Contractors Association. No

Metal Panels
1. COMPANY NAME ARS INDUSTRIES, INC. ATAS INTERNATIONAL INC.
2. PRODUCT NAME SSC PC SNAP-ON SEAM/BATTEN
3 CONFIGURATION
3.1 STYLE
A. Simulated Shingle (specific type if applicable)
B. Simulated Shake (specific type if applicable)
C. Simulated Slate (specific type if applicable)
D. Simulated Tile (specific type if applicable)
E. Other (specify type) SNAP-ON BATTEN STANDING SEAM SNAP-ON SEAM/SNAP-ON BATTEN STANDING SEAM
3.2 COMPONENT TYPE AND SIZE
A. Panel [width (in.), maximum length (ft.)] 12, 16, 18, 20, 24 X 50 12-1/2, 15-1/4 X 65
B. Individual (dimensions: inches x inches)
3.3 MATERIALS, THICKNESSES, AND FINISHES
GALVANIZED STEEL (ga.): Thicknesses 22, 26 24
Finishes KYNAR 500, SILICON POLYESTER, MILL KYNAR 500
STAINLESS STEEL (ga.) Thicknesses 22, 26
Finishes KYNAR 500, SILICON POLYESTER, MILL
GALVALUME (ga.) Thicknesses 22, 26
Finishes KYNAR 500, SILICON POLYESTER, MILL
ALUMINIZED STEEL (ga.) Thicknesses 22, 26
Finishes KYNAR 500, SILICON POLYESTER, MILL
ALUMINUM (in.) Thicknesses 0.19, 0.32, 0.40 0.032, 0.040
Finishes KYNAR 500, SILICON POLYESTER, MILL KYNAR 500
COPPER (oz.) Thicknesses 16, 20 16
Finishes MILL --
TERNE METAL (ga.) Thicknesses 22, 26
Finishes MILL
ZINC (ga.) Thicknesses --
Finishes --
4. SYSTEMS RECOMMENDATIONS
Min. Slope Recommended In Normal Application (in. per ft.) 3:12 3:12
Min. Slope Recommended In Special Application (in. per ft.) -- 3:12
DECK TYPES'
Solid Deck, Wood X X
Spaced Sheathing, Wood X
Decking Not Required X
Underlayment Recommended (type or NA) 30 LB. FELT OR EQUIVALENT 30 LB. FELT
5. PANEL CONFIGURATION (For components in item 3.2A
above; for individual components, see item 6.)
5.1 INTERLOCKING METHOD, HEIGHT (inches), AND SEAM SEALANT HEIGHT (inches) / SEAM SEALANT (F = Factory HEIGHT (inches) / SEAM SEALANT (F = Factory
Applied; E = Field applied; N = None) Applied; E = Field applied; N = None)
Overlapped
Interlocked
Slip Locked 1 / F, E
Snap Together 1-1/4 / N
5.2 FASTENING METHOD
Through Fastened (exposed or concealed, specify)
Clip (exposed or concealed, specify) CONCEALED CONCEALED
6. INDIVIDUAL COMPONENT CONFIGURATION (For components
in item 3.2B above; for panels, see item 5.)
6.1 DIMENSIONS
Weight Per Roof Square (pounds)
Exposure (inches)
Coverage (approx. no. of pieces per square at listed exposure)
6.2 INSTALLATION PROCESSING
Through-Fastened (exposed or concealed, specify)
Kind(s) Of Fastener Required (nails, staples, screws, NA)
Number Of Fasteners Per Piece (number or NA)
Seam Snap-In Or Interlock (specify or NA)
Adhesive/Sealant Required (yes/no)
Support Battens Required (yes/no)
7. MANUFACTURER/PRODUCT DATA
Year Product First Sold 1980 1979
Number of Squares Installed 1 MILLION + > 100,000
Method Of Distribution (distributors, direct) DISTRIBUTORS, DIRECT DISTRIBUTORS
Number Of Rgional Service Locations 1 2
Licensed Applicator Agreement (yes/no) YES NO
For Sales Information, Contact C. LEVERETT 205/836-6777 J. BUSH 610/395-8446
For Technical Information, Contact M. WEED 205/836-6777 J. BUSH 610/395-8446
8. ASTM E331 WATER PENETRATION TEST RESULTS
(results or none)
-- NONE
9. ASTM E1646 WATER PENETRATION TEST RESULTS
(results or none)
10. ASTM E283 AIR INFILTRATION TEST RESULTS
(results or none)
-- NONE
11. ASTM E1680 AIR INFILTRATION TEST RESULTS
(results or none)
10. UL FIRE RATINGS FOR ANY SPECIFICATION (per UL 790) CLASS A CLASS A
11. FM/UL WIND UPLIFT RATING FOR ANY SPECIFICATION -- UL-90
12. SEE APPENDIX IF CHECKED X
NA=not applicable
166