2000 by the National Roofing Contractors Association. No
2000 by the National Roofing Contractors Association. No
2000 by the National Roofing Contractors Association. No
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Metal Panels<br />
1. COMPANY NAME PETERSEN ALUMINUM CORP. PETERSEN ALUMINUM CORP.<br />
2. PRODUCT NAME FLUSH PANEL REVEAL PANEL<br />
3 CONFIGURATION<br />
3.1 STYLE<br />
A. Simulated Shingle (specific type if applicable)<br />
B. Simulated Shake (specific type if applicable)<br />
C. Simulated Slate (specific type if applicable)<br />
D. Simulated Tile (specific type if applicable)<br />
E. O<strong>the</strong>r (specify type) STANDING SEAM STANDING SEAM<br />
3.2 COMPONENT TYPE AND SIZE<br />
A. Panel [width (in.), maximum length (ft.)] 7-18 X 40 7-18 X 40<br />
B. Individual (dimensions: inches x inches)<br />
3.3 MATERIALS, THICKNESSES, AND FINISHES<br />
GALVANIZED STEEL (ga.): Thicknesses 22, 24 22, 24<br />
Finishes KYNAR 500 KYNAR 500<br />
STAINLESS STEEL (ga.) Thicknesses<br />
Finishes<br />
GALVALUME (ga.) Thicknesses<br />
Finishes<br />
ALUMINIZED STEEL (ga.) Thicknesses<br />
Finishes<br />
ALUMINUM (in.) Thicknesses 0.032 0.032<br />
Finishes KYNAR 500 KYNAR 500<br />
COPPER (oz.) Thicknesses<br />
Finishes<br />
TERNE METAL (ga.) Thicknesses<br />
Finishes<br />
ZINC (ga.) Thicknesses<br />
Finishes<br />
4. SYSTEMS RECOMMENDATIONS<br />
Min. Slope Recommended In <strong>No</strong>rmal Application (in. per ft.) -- --<br />
Min. Slope Recommended In Special Application (in. per ft.) -- --<br />
DECK TYPES'<br />
Solid Deck, Wood X X<br />
Spaced Sheathing, Wood X X<br />
Decking <strong>No</strong>t Required<br />
Underlayment Recommended (type or NA) 30 LB. FELT 30 LB. FELT<br />
5. PANEL CONFIGURATION (For components in item 3.2A<br />
above; for individual components, see item 6.)<br />
5.1 INTERLOCKING METHOD, HEIGHT (inches), AND SEAM SEALANT HEIGHT (inches) / SEAM SEALANT (F = Factory HEIGHT (inches) / SEAM SEALANT (F = Factory<br />
Applied; E = Field applied; N = <strong>No</strong>ne) Applied; E = Field applied; N = <strong>No</strong>ne)<br />
Overlapped<br />
Interlocked<br />
Slip Locked<br />
Snap Toge<strong>the</strong>r<br />
1 / N 1 / N<br />
5.2 FASTENING METHOD<br />
Through Fastened (exposed or concealed, specify)<br />
Clip (exposed or concealed, specify)<br />
CONCEALED CONCEALED<br />
6. INDIVIDUAL COMPONENT CONFIGURATION (For components<br />
in item 3.2B above; for panels, see item 5.)<br />
6.1 DIMENSIONS<br />
Weight Per Roof Square (pounds)<br />
Exposure (inches)<br />
Coverage (approx. no. of pieces per square at listed exposure)<br />
6.2 INSTALLATION PROCESSING<br />
Through-Fastened (exposed or concealed, specify)<br />
Kind(s) Of Fastener Required (nails, staples, screws, NA)<br />
Number Of Fasteners Per Piece (number or NA)<br />
Seam Snap-In Or Interlock (specify or NA)<br />
Adhesive/Sealant Required (yes/no)<br />
Support Battens Required (yes/no)<br />
7. MANUFACTURER/PRODUCT DATA<br />
Year Product First Sold 1978 1978<br />
Number of Squares Installed > 100,000 > 100,000<br />
Method Of Distribution (distributors, direct) DISTRIBUTORS, DIRECT DISTRIBUTORS, DIRECT<br />
Number Of Rgional Service Locations 4 4<br />
Licensed Applicator Agreement (yes/no) NO NO<br />
For Sales Information, Contact 800/323-1960 800/323-1960<br />
For Technical Information, Contact 800/323-1960 800/323-1960<br />
8. ASTM E331 WATER INFILTRATION TEST RESULTS NONE NONE<br />
9. ASTM E283 AIR INFILTRATION TEST RESULTS NONE NONE<br />
10. UL FIRE RATINGS FOR ANY SPECIFICATION (per UL 790) NONE NONE<br />
11. FM/UL WIND UPLIFT RATING FOR ANY SPECIFICATION NONE NONE<br />
12. SEE APPENDIX IF CHECKED<br />
NA=not applicable<br />
184
Change language