TOOLED THICK COMPOSITES by ARVEN H. SAUNDERS III ...

(Chen, 2002) Chen, Y., "Modeling of Fiber Waviness in Thick Composites", American
Helicopter Society 58th Annual Forum, Montreal, Canada, May, 2002
(Chun, 2000) Chun, H., Shin, J., and Daniel, I.M., “Effects of Material and Geometric
Nonlinearities on the Tensile and Compressive Behavior of Composite
Materials with Fiber Waviness”, Composites Science and Technology 61
(2001), pp. 125-134.
(Ciriscioli, 1990) Ciriscioli, P.R., and Springer, G.S., Smart Autoclave Cure Of Composites,
Technomic Publishing Co., Lancaster, PA, 1990.
(Ciurna, 2009) Ciurna, J., Arias, G., and Ozel, T., “A Neural Network Modeling and Particle
Swarm Optimization (PSO) of Process Parameters in Pulsed Laser
Micromachining of Hardened AISI H13 Steel”, Materials and Manufacturing
Processes, 24: 358-368, 2009.
(Costa, 2005) Costa, M., Botelho, E., de Paiva, J., and Rezende, M., “Characterization of
Cure of Carbon/Epoxy Prepreg Used in Aerospace Field”, Materials
Research, Vol. 8, No. 3: 317-322, 2005.
(Dave, 1987) Dave, R., Kardos, J.L., and Dudukovic, M.P., "A Model for Resin Flow
During Composite Processing: Part I- General Mathematical Development,"
Polymer Composites, Vol. 8, 1987, p. 29.
(Gutowski, 1987) Gutowski, T. G., et al, "The consolidation of Laminate Composites", Journal
of Composite Materials, Vol. 21, February 1987, pp. 172 - 187.
(Gutowski, 1997) Gutowski, T. G. (Editor), Advanced Composites Manufacturing, John Wiley
and Sons, New York, 1997.
(Hubert, 1997) Hubert, P., Aspects Of Flow And Compaction Of Laminated Composite
Shapes During Cure”, PhD thesis, University of British Columbia, 1996.
73