TOOLED THICK COMPOSITES by ARVEN H. SAUNDERS III ...

(Pal, 2005) Pal, R. “Porosity-dependence of Effective Mechanical Properties of Pore-
solid Composite Materials”, Journal of Composite Materials, Vol. 39, No.
13, pp. 1147-1158, 2005.
(Palanikumar, 2008) Palanikumar, K., Prakash, S., and Shanmugam, K., “Evaluation of
Delamination in Drilling GFRP Composites”, Materials and Manufacturing
Processes, 24: 858-864, 2005.
(Petterssen 2009) Petterssen, F., Saxen, H., and Deb, K., “Genetic Algorithm-Based
Multicriteria Optimization of Ironmaking in the Blast Furnace”, Materials and
Manufacturing Processes, 24: 343-349, 2009.
(Rai, 1997) Rai, N. and Pitchumani, R. "Optimal Cure Cycles for the Fabrication of
Thermosetting-matrix Composites", Polymer Composites, 18(4), 566-581,
1997.
(Rodriguez, 2004) Rodriguez, E., Giacomelli, F., Vàzquez, A., “Permeability–Porosity
Relationship in RTM for Different Fiberglass and Natural Reinforcements”,
Journal of Composite Materials, Vol. 38, No. 3, pp. 259-268, 2004.
(Saunders, 1996) Saunders, A. , Buczek, M., Mason, D., and Lee, C.W., Adaptive Control
Cure Monitoring (ACCM), Final Report, 1999, Aviation Applied Technology
Directorate, U.S. Army.
(Sheldon, 2001) Sheldon, K.E., Anderson-Cook, C.M., O'Brien, W.F., "Analysis Methods to
Control Performance Variability and Costs in Aircraft Turbine Engine
Manufacturing", American Society of Composites Conference, Blacksburg,
Va., Sept 2001
(Shin, 2000) Shin, D.D. and Hahn, H.T., "A Consistent Cure Kinetic Model for AS4/3502
Graphite/epoxy", Composites: Part A, Vol. 31, p.991-999, 2000.
76