YK CENTRIFUGAL LIQUID CHILLER OptiView ... - Johnson Controls
YK CENTRIFUGAL LIQUID CHILLER OptiView ... - Johnson Controls
YK CENTRIFUGAL LIQUID CHILLER OptiView ... - Johnson Controls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8.1 SETUP SCREEN<br />
The 'SETUP SCREEN' displays general configuration<br />
parameters as set by the microprocessor board jumpers<br />
and program switches. In addition, it allows the real time<br />
clock to be enabled, setting of the time and date and<br />
specification of the time format:<br />
Set Date<br />
Used to specify the present date, the date is critical to<br />
logging system shutdowns accurately and for utilising<br />
the scheduling capabilities. The day, month and<br />
four-digit year (using leading zeroes as necessary) must<br />
be entered.<br />
Set Time<br />
Used to specify the present time, the time is critical to<br />
logging system shutdowns accurately and for utilising<br />
the scheduling capabilities. The hour and minute<br />
desired (using leading zeroes as necessary) must be<br />
entered. If the unit is in 24-hour mode, the time must be<br />
entered in the 24-hour format, otherwise AM or PM must<br />
be selected for the entered time.<br />
Clock (Enabled / Disabled)<br />
Used to enable or disable the real-time clock in order to<br />
conserve battery life. The clock must be enabled during<br />
commissioning. For prolonged shutdowns the clock<br />
should be disabled.<br />
12/24 Hr<br />
Used to specify the time format. 12-Hour time format<br />
includes AM and PM modifiers and shows time between<br />
1:00 and 12:59, 24-Hour time format shows times<br />
between 0:00 and 23:59.<br />
Schedule (see Section 8.1.1)<br />
User (see Section 8.1.2)<br />
Comms (see Section 8.1.3)<br />
Printer (see Section 8.1.4)<br />
Sales Order (see Section 8.1.5)<br />
Operations (see Section 8.1.6)<br />
160-54-OI-GB0 17<br />
Diagnostics - Service Technicians