OPERATING INSTRUCTIONS NORDAC Frequency Inverters

Menu displayed text description
option
18
14 F r e q u e n c y r e l a y Floating contact at Terminals 19/20
5 0 . 5 H z P 1 - closes ---> output frequency exceeds the set value
- opens ---> output frequency drops below the set value
VALUE keys ---> set frequency required
15 M u l t i f u n c t . r e l a y VALUE keys ---> function frequency - signals a further frequency, chosen
c u r r e n t P 1 ---> function current - signals a variable current, set
16 F u n c t . f r e q u e n c y With function selected ---> frequency
2 . 0 H z P 1 - as described under option 14
- but signalling at Terminals 17/18
- contact closes if the set frequency is exceeded
17 F u n c t i o n c u r r e n t With function selected ---> current
. . . A P 1 Floating contact at terminals 17/18
- closes ---> output current exceeds the set value
- opens ---> output current drops below the set value minus the
value set with the sensitivity (option 18)
18 S e n s i t i v i t y Function: setting a switch-off threshold
1 5 % P 1
Aim: avoids persistent switching of the multifunction relay
in the "current" function on slight current fluctuations