Euroview 70 Technical Manual - West Coast Vinyl Windows

DIN
18516-1 Cladding for external walls, ventilated at rear –
Requirements, principles of testing
18516-4 Back-ventilated, non-loadbearing, external
enclosures of buildings, made from tempered safety
glass panels – Requirements and testing
18540 Sealing of exterior wall joints in building using
joint sealants
18542* Sealing of outside wall joints with impregnated sealing
tapes made of cellular plastics – Impregnated sealing
tapes – Requirements and testing
18545-1 Glazing with sealants – Rebates – Requirements
18545-3 Glazing with sealants – Rebates – Glazing systems
31051* Fundamentals of maintenance
52452-1 Testing of building sealants for compatibility
with construction materials
52452-2 Testing of sealants in building construction –
Compatibility of sealants – Compatibility with
chemicals
52452-3 Testing of sealing compounds for sealing and
glazing in building constructions – Compatibility of
sealers with each other, compatiblity of hardened
sealers with fresh sealers (withdrawn document)
52460 Sealing and glazing – Terms
58125 Construction of schools – Constructional
requirements for accident prevention
9.3 Guidelines, technical leaflets and
publications1) VDI 2719* Sound isolation of windows and their auxiliary
equipment
RAL-GZ 520 Quality assurance for insulation glass units
RAL-RG 607/3 Quality assurance of fittings for tilt and
turn
1) Some of the publications mentioned in this chapter are not available in English
language. Titles have been translated only analogously.
RAL-RG 607/13* Quality assurance – Burglar resistance
– Fittings
RAL-GZ 716/1* Quality assurance for plastic window
systems
Section I: Plastic window profiles
Section II: Extruded seals
Section III: Initial type testing of plastic window
systems
ift-Guideline 7/86 Testing of glazing systems with prefabricated
profiles – Institut für Fenstertechnik e.V.,
Rosenheim
ift-Guideline 10/86 Testing of the mechanical
connection in PVC-windows – Institut für
Fenstertechnik e.V., Rosenheim
ift-Forum 1/99 Linearly supported glazings – Technical
regulations – Utilisation – Predimensioning –
Institut für Fenstertechnik e.V., Rosenheim
IVD-Technical leaflet No. 4 Elastomeric joint sealing
strips for sealing of joints in buildings using reacting
adhesives – Industrieverband Dichtstoffe, Düsseldorf
IVD-Technical leaflet No. 5 Butyl strips –
Industrieverband Dichtstoffe, Düsseldorf
IVD-Technical leaflet No. 9* Sealing compounds in
the connection joint for windows and entry doors –
Basis for planning and execution – Industrieverband
Dichtstoffe, Düsseldorf
DIBt-Technical guidelines 9/98 Technical
regulations for using of linearly supported glazings
– Deutsches Institut für Bautechnik, Berlin
TR Glass 2 – 3/87 Technical guideline for glaziers –
Wind load and glass thickness – Choice of glass
thickness in dependency of the wind load –
Bundesinnungsverband des Glaserhandwerks
TR Glass 3 – 3/79 Technical guideline for glaziers –
Glazier work – Wedging of glazing units –
Bundesinnungsverband des Glaserhandwerks
TR Glass 20 Technical guideline for glaziers – Installation
of windows and french windows with examples for
users – Bundesinnungsverband des Glaserhandwerks
WITHIN THE QKE · WWW.GKFP.DE
References
* quoted in the text
Chapter
9
67