You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Make calls<br />
call can only be made between two parties. The video call<br />
can be made to a compatible mobile phone or an ISDN<br />
client. Video calls cannot be made while there is another<br />
voice, video, or data call active.<br />
Icons:<br />
You are not receiving video (either the recipient is not<br />
sending video, or the network is not transmitting it).<br />
You have denied video sending from your phone. To<br />
send a still image instead, see ‘Call settings’, p. 90.<br />
1 To start a video call, enter<br />
the phone number in the<br />
standby mode, or select<br />
Contacts, and select a<br />
contact. Then select<br />
Options > Call > Video<br />
call.<br />
2 Starting a video call may<br />
take a while. Waiting for<br />
image is shown.<br />
If the call is not successful<br />
(for example, video calls are not supported by the<br />
network, or the receiving device is not compatible) you<br />
are asked if you want to try a normal call or send a<br />
message instead.<br />
Tip! To increase or decrease the volume during a<br />
call, press or .<br />
24 Copyright © 2005 <strong>Nokia</strong>. All rights reserved.<br />
The video call is active when you can see two video<br />
images and hear the sound through the loudspeaker.<br />
The call recipient may deny video sending ( ), in<br />
which case you may see a still image or a grey<br />
background graphic. You will hear the sound.<br />
Select Enable/Disable: Sending video, Sending audio<br />
or Sending audio & video if you want to change<br />
between showing video or hearing only sound.<br />
Select Zoom in or Zoom out to zoom your own image.<br />
Zoom indicator is shown on the top of the display.<br />
3 To end the video call, press .<br />
Speed dial a phone number<br />
To assign a phone number to one of the speed dialling keys<br />
( — ), press , and select Tools > Speed<br />
dial. is reserved for the voice mailbox.<br />
To call in the standby mode, press the speed dial key and<br />
.<br />
Tip! To speed dial a number by pressing and holding<br />
the key, press , and select Tools > Settings > Call ><br />
Speed dialling > On.<br />
Make a conference call<br />
1 Make a call to the first participant.<br />
2 To make a call to another participant, select Options ><br />
New call. The first call is automatically put on hold.