SPECICATION NO. ETI/PSI/144 (12/91) SPECIFICATION FOR ... - rdso

7.2 The required quantity of instruments, test equipments and tools shall be
indicated to the successful tenderer at the time of issue of the contract.
8.0 Spares
8.1 The tenderer shall quote for spares as indicated below for the SCADA
equipment:
- 39 -
i) Modules of various types (including 10% of each type
power supply units) used at RCC.
ii) Modules of various types (including 10% of each type
power supply units) used at controlled stations.
iii) Spare transducers and summation CTs One of each type
iv) Interposing relays 10% of each type
v) Components such as critical ICs 20% of each type
vi) Read relays 20% of each type
vii) Various types of lamps/LEDs used 10% of each type
on MDB
viii) Spares for individual items As considered
such as printer etc necessary for
a period of
2 years.
ix) Spare keyboard for VDU one
8.2 The tenderer shall confirm in his offer the availability of spares for a
period of 15 years after commissioning of the equipment.
9.0 Technical deviations
The tenderer shall specifically indicate in a statement attached with his
offer, his compliance with each clause and sub clause of this specification. A separate
statement shall be attached with the offer indicating reference to the clauses where the
tenderer deviates therefrom together with detailed remarks/justification. If either the