SPECICATION NO. ETI/PSI/144 (12/91) SPECIFICATION FOR ... - rdso

More documents

Recommendations

Info

statement of compliance or statement of deviations is not attached with the offer, it is not likely to be considered. If there are no deviations, a ‗NIL‘ statement shall be attached. 10.0 Particular specification - 40 - Particular specification giving details of the location of RCC, repeater the purchaser. stations, stations to be controlled, number of telecommands, telesignals and telemetered parameters at each on the controlled stations and other detail will be furnished separately by the purchaser. 11.0 Type Tests 11.1 The type tests shall be carried out in the presence of the purchaser‘s representative at the manufacturer‘s works on a complete set of equipment (sending end and receiving end) to prove the quality of the design and workmanship and there conformity with the specification. If any of the type tests on components have already been successfully carried out, repetition of such tests may be waived, provided photostat copies of the type tests certificates and other particulars are submitted and got approved by the purchaser. 11.2 Before giving the call to RDSO/the Chief Electrical Engineer for inspection and testing of the prototype of the system, the manufacturer shall submit a detailed test schedule consisting of schematic circuit diagrams for each of the tests and nature of the test, venue of the test and the duration of each test and the total number of days required to completer the test at one stretch. Once the schedule is approves, the test shall invariably be done accordingly. However, during the process of type testing or even later, RDSO representative reserves the right to conduct any additional test(s) besides those specified herein, on any equipment/sub-system or system so as to test the system to his satisfaction or for gaining additional information and knowledge. In case any dispute or disagreement arises between the manufacture and RDSO/the Chief electrical Engineer during the process of testing as regards the type tests and/or the interpretation and acceptability of the type test results, it shall be brought to the notice of the Director General(Traction Installations), RDSO/the Chief Electrical Engineer as the case any be, whose decision shall be final and binding. 11.3 The type tests shall include visual inspection, insulation resistance test, power frequency high voltage withstand test, functional tests, operational tests and test on major components. The detail of tests to be carried out shall be finalized by mutual consultation between the purchaser the successful tederer.
- 41 - 11.4 Only after clear written approval of the result of the tests on the prototype unit is communicated by RDSO/Purchaser to the manufacturer, shall be take up bulk manufacture of the ordered equipment which shall be strictly with the same materials and processed adopted for prototype unit. In no circumstances shall the material, other the those approved in the design/drawings and/or prototype. 11.5 The successful tenderer shall be required to supply 3 sets of type test reports to the purchaser. <strong>12</strong>.0 Erection and Commissioning tests The creation and commissioning of SCADA equipment shall be done bye the successful tenderer who will arrange all tools, plants, instruments and other materials required for the purpose at his own cost. Tests shall be carried out during creation/ commissioning of the equipment at site. The successful tenderer shall be required to submit to the purchaser the details of the checks and tests to be carried out during erection and commissioning. 13.0 Tests after installation and commissioning of the equipments Tests shall be carried out on the complete equipment in the presence of the purchaser representative to check the erection and commissioning of the equipment. This shall include functional tests, checking of adjustment of transducers, limit settings of measurands, cyclic update time, telecommand execution time, signal levels both on the send and receive side of the various modems for satisfactory operation of the equipment, and others. Three sets of the test report shall be supplied to the purchaser for record. 14.0 Technical data, Drawings and Information 14.1 The tenderer shall furnish guaranteed performance data, technical an other particulars of the equipment offered in the proforma at annexure -2. 14.2 The information furnished in schedule of guaranteed performance data, technical and other particular (Annexure-2) shall be complete in all respects. If there is any entry like shall be furnished later or blanks are left against any item, the tender is not likely to we considered as such omissions causes dele in finalising the tender. 14.3 The tenderer shall submit alongwith his offer the following:
Page 1 and 2: SPECIFICATION FOR SPECICATION NO. E
Page 3 and 4: 2.3 Atmospheric Conditions Maximum
Page 5 and 6: phases of the 220 or 132kV, three p
Page 7 and 8: main control and relay panel, 240V
Page 9 and 10: indicated by operation of Buchholz
Page 11 and 12: - 11 - ―PT fuse fail‖ indicatio
Page 13 and 14: - 13 - 5.8.8. The Railways will tap
Page 15 and 16: - 15 - (ii) There shall be two data
Page 17 and 18: 6.1.3. Mimic diagram board (MDB) -
Page 19 and 20: equipments status including manuall
Page 21 and 22: shall confirm in the offer that the
Page 23 and 24: 6.1.6 Data-logging printers - 23 -
Page 25 and 26: - 25 - 6.2.3.2 The ac supply will h
Page 27 and 28: 6.4 Equipment capacity - 27 - 6.4.1
Page 29 and 30: - 29 - 6.5.2 Whenever the number of
Page 31 and 32: - 31 - channels and other such aids
Page 33 and 34: e so engineered that they are clear
Page 35 and 36: 6.12.4.4 The system shall also take
Page 37 and 38: where, Ln, Ln+l = kilometerage of t
Page 39: 7.2 The required quantity of instru
Page 43 and 44: - 43 - c) Detailed step by step pro
Page 45 and 46: - 45 - ANNEXURE-I TYPICAL REQUIREME
Page 47 and 48: - 47 - ANNEXURE-2 SCHEDULE OF GURAN
Page 49 and 50: - 49 - ii) Battery voltage and ampe
Page 51 and 52: - 51 - ii) Limits (field settable)
Page 53 and 54: c) Number of controlled stations th
Page 55 and 56: 40. Level meters ( dB Meter) i) Mak
Page 57 and 58: ix) Rated accuracy limit factor 15
Page 59 and 60: - 59 -
Page 61 and 62: SS -TRACTION SUBSTAION. TP -AUTO TR
Page 63: - 63 -

SPECICATION NO. ETI/PSI/144 (12/91) SPECIFICATION FOR ... - rdso

Create successful ePaper yourself

Delete template?

Save as template?