SPECICATION NO. ETI/PSI/144 (12/91) SPECIFICATION FOR ... - rdso

- 43 -
c) Detailed step by step procedure for operation, maintenances and
repairs of the system and individual equipments, indicating procedure for troubleshooting,
measurement of various signals at different points and diagnostic check to be
adopted for repairs at site.
d) Details of various RCC modules indicating rating and modification
number and layout of equipment.
10 Details of SCADA software, including operating instructions.
14.5 Only after all the designer and drawings have been approved and
clearance given by RDSO to this xxxx the manufacturer shall take up manufacturer of the
prototype unit for RDSO inspection. It is so clearly understood that any change required
to be done in the prototype unit as required RDSO shall be done expeditiously.
14.5 The successful tenderer shall be required to supply 3 prints of the final
approved drawings and 3 dates of reproducible tracings.
14.6 The successful tenderer shall supply 10 copies of technical booklets giving
detailed description of the equipment, constructional features, ratings and characteristics
and instruction for operation and maintenance of the system as well as of individual
equipment.
15. Training of Railway staff
The offer shall include the training of two Engineers and six Supervisors
of the Indian Railways free of cost at the manufacturers in India and abroad. The total
duration of training shall be 12 weeks, of which approximately six weeks will be at
manufacturers works and six weeks on a railway system or 0ther pubic utility. The cost of
travel to the country of manufacture and back will be borne by the Indian Railways.
Other details shall be settled at the time of finalising the contract or purchase order.
The training shall cover the following aspects:
a) Study of system engineering and trouble shooting of all modules
and system faults.
b) Training in operation of SCADA equipment and Man-Machine
interaction.
c) Erection, testing, commissioning and adjustments required in
service of the equipment.
16. Warranty
16.1 The SCADA equipment supplied against a purchase order/contract in which
this specification is quoted, irrespective of origin of individual equipment
(imported/indigenous), shall be guaranteed for trouble-free and satisfactory performance
for a period of 18 months from the date of supply or 12 months from the date of