Set-up

■Press to exit from
a menu screen
■Press to go back
to the previous
screen
Preparations
● Network connections (p. 41)
● Network settings (p. 42-44)
● Before connecting the Network camera to the TV, please complete “IP setting” and run
“Connection test”
With all connected equipment turned on
Display “VIERA Link” menu
● If there is no registered camera displayed, please set it in
Network Camera settings. (p. 44)
● There is also an option to start with sensor detection.
Select “Network camera”
VIERA Link control
Network camera
Speaker output
Back to TV
View
Select OK
RETURN
4 cam / 8 cam
Multi screen
(1/9)
Camera name
Camera 1
Model
BL-C210A
Select OK 1 - 9
RETURN
4 cam / 8 cam
Single screen
Camera name
Camera 1
Model
BL-C210A
Pan
Tilt
RETURN
1 - 9 Preset position
0 Home position
TV
4 split screen
Multi screen
(1/4)
Camera name
Camera 1
Model
BL-C210A
9 split screen
Single screen
Network Camera
You can operate the Network camera from the TV remote and also check the images from the Network
camera on your TV.
● VIERA Link control only with the TV’s remote control (p. 39)
select
OK
select
select
OK to Single screen
Navigation area
Pan
Tilt
1 - 9
0
● Default camera setting (p. 44)
OK to Single screen
RETURN
Preset position
Home position
Note
● A number of VIERA-compatible network cameras can be found at the following sites:
http://www.panasonic.com/
http://panasonic.net/pcc/products/netwkcam/
● For more details on setting and operation of the Network camera, please also read
the operating manual for the Network camera.
Using Network services
Advanced
47