[10] TEST COMMAND, TROUBLE CODES - OlsonBros
[10] TEST COMMAND, TROUBLE CODES - OlsonBros
[10] TEST COMMAND, TROUBLE CODES - OlsonBros
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Main Sub<br />
code code<br />
43 05 Fusing temperature setting<br />
in duplex copy (FU TEMP<br />
DPLX) (Enabled when<br />
Duplex setting is ON)<br />
Contents Details of function/operation<br />
14 Fusing start temperature<br />
setting (FU TEMP START)<br />
[Function]<br />
In the case of duplex copy, the shift temperature set with this test command is applied to the fusing<br />
temperature.<br />
When this test command is executed, the current set code number is displayed.<br />
Enter the desired code number and press [ENTER/START] key to save the setting.<br />
Code Shift temperature (°C) Remark<br />
0 ±0 Default<br />
1 -8<br />
2 -6<br />
3 -4<br />
4 -2<br />
5 ±0<br />
6 +2<br />
7 +4<br />
8 +6<br />
9 +8<br />
[Operation]<br />
The operation is similar to test command 21-01.<br />
[Function]<br />
When this test command is started, the currently set code number is displayed.<br />
Press [←/→/<strong>10</strong>KEY] to switch the setting, and press [ENTER/START] key to save it to the EEPROM.<br />
The machine goes to the sub code entry standby mode.<br />
Code Set temperature (°C) Remark<br />
0 160<br />
1 165<br />
2 170<br />
3 175<br />
4 180<br />
5 185<br />
6 190<br />
7 195 Default<br />
8 200<br />
[Operation]<br />
The operation is similar to test command 21-01.<br />
AR-168S/168D <strong>TEST</strong> <strong>COMMAND</strong>, <strong>TROUBLE</strong> <strong>CODES</strong> <strong>10</strong> - 17