[10] TEST COMMAND, TROUBLE CODES - OlsonBros

More documents

Recommendations

Info

Main Sub code code 46 01 Copy density adjustment (300dpi) (EXP.LEVEL 300) Contents Details of function/operation 02 Copy density adjustment (600dpi) (EXP.LEVEL 600) [Function] Copy density is set for each mode. When this test command is executed, the current se value is displayed in 2 digits (Default: 50). Change the set value and press [START] key to make a copy under the set value. When the set value is increased, the copy becomes darker. When the set value is decreased, the copy becomes lighter. In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy, Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 copies become lighter, too. Press [←/→] key to switch the mode. The set value of the selected mode is displayed on the LCD. (Adjustment value: 1 – 99) The setting procedure of the magnification ratio is the same as that to copy operation. Mode Display item Default LED AE mode (300dpi) AE 50 COPY mode lamp TEXT mode (300dpi) TEXT 50 PRINT mode lamp PHOTO mode PHOTO 50 SCAN mode lamp TS mode (TEXT)(300dpi) TSTXT 50 PRINT mode lamp SCAN mode lamp TS mode (AE)(300dpi) TSAE 50 COPY mode lamp SCAN mode lamp [Operation] 1) Initial display 46-01 EXP.LEVEL 300 AE 100% 50( 1-99) 2) [←] Mode selection 46-01 EXP.LEVEL 300 TSAE 100% 50( 1-99) 2) [→] Mode selection 46-01 EXP.LEVEL 300 TEXT 100% 50( 1-99) 3) [10KEY] Value entry 46-01 EXP.LEVEL 300 AE 100% 62( 1-99) [Function] Copy density is set for each mode. When this test command is executed, the current se value is displayed in 2 digits (Default: 50). Change the set value and press [START] key to make a copy under the set value. When the set value is increased, the copy becomes darker. When the set value is decreased, the copy becomes lighter. In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy, Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 copies become lighter, too. Press [←/→] key to switch the mode. The set value of the selected mode is displayed on the LCD. (Adjustment value: 1 – 99) [Operation] The operation is similar to test command 46-01. AR-168S/168D TEST COMMAND, TROUBLE CODES 10 - 18 4) [START] Fixing and printing value (No change on the LCD) ∗ Print is started in the set mode. 46-01 EXP.LEVEL 300 AE 100% 62( 1-99) 4) To fix the set value without printing, press [Enter] key. 46-01 EXP.LEVEL 300 AE 100% 62( 1-99) ∗ To cancel manual feed paper empty MSG, press any key. ∗ When performing the AE mode exposure adjustment, place the test chart on the document table so that the center area of 10cm is not covered. Mode Display item Default LED AE mode (600dpi) AE 50 COPY mode lamp TEXT mode (600dpi) TEXT 50 PRINT mode lamp PHOTO mode PHOTO 50 SCAN mode lamp TS mode (TEXT) (600dpi) TSTXT 50 PRINT mode lampSCAN mode lamp TS mode (AE) (600dpi) TSAE 50 COPY mode lampSCAN mode lamp
Main Sub code code 46 12 Density adjustment in the FAX mode (Collective adjustment) (Executable only when the FAX is installed.) Contents Details of function/operation 13 FAX mode density adjustment (normal text) (Executable only when the FAX is installed.) 14 FAX mode density adjustment (Fine text) (Executable only when the FAX is installed.) [Function] When [START] key is pressed, scan is executed with the entered exposure adjustment value and the data stored on the FAX side is rewritten into the entered value. All data of the exposure adjustment values are rewritten into the same value. For the density adjustment table data, refer to TC46-13 (density adjustment (normal text) in the FAX mode). [Operation] 1) Initial display ADJUST EXP. AUTO XX ("XX" is the exposure adjustment value of normal text stored on the FAX side.) 2) Enter a 2-digit value as the exposure adjustment value. ADJUST EXP. AUTO YY ("YY" is the entered exposure adjustment value.) [Function] Scan is started with the exposure adjustment value entered with [START] key, and the stored data of the selected mode on the FAX side is rewritten into the input value. Density adjustment value data table Mode Photo Exposure adjustment value STD (Normal text) off Fine (Fine text) on off Sfine (Super fine) on off When initializing each data: 50 [Operation] 1) Initial display ADJUST EXP. STD XX ("XX" is the corresponding exposure adjustment value of normal text mode stored on the FAX side.) 2) Enter a 2-digit value as the exposure adjustment value with [10KEY]. ADJUST EXP. STD YY ("YY" is the entered exposure adjustment value.) [Function] When [START] key is pressed, scan is started with the entered exposure adjustment value and the data of the selected mode on the FAX side is changed to the entered value. For the density adjustment value table data, refer to TC46-13 (FAX mode density adjustment (normal text).) [Operation] 1) Initial display ADJUST EXP. FINE XX ("XX" is the corresponding exposure adjustment value of the fine text mode stored on the FAX side.) 2) Enter a 2-digit value as the exposure adjustment value with [10KEY]. ADJUST EXP. FINE YY ("YY" is the entered exposure adjustment value.) AR-168S/168D TEST COMMAND, TROUBLE CODES 10 - 19 3) Scan is started (self print), and the LED of [START] key is turned off. ADJUST EXP. AUTO SCAN YY 4) Print is started (self print). ADJUST EXP. AUTO PRINT YY After completion of printing, returns to “2)” display. 3) Scan is started (self print), and the LED of [START] key is turned off. ADJUST EXP. STD SCAN YY 4) Print is started (self print). ADJUST EXP. STD PRINT YY After completion of printing, returns to “2)” display. 3) Scan start (self print) ADJUST EXP. FINE SCAN YY 4) Print start (self print) ADJUST EXP. AUTO PRINT YY After completion of printing, returns to “2)” display.
Page 1 and 2: [10] TEST COMMAND, TROUBLE CODES 1.
Page 3 and 4: 4. Descriptions of various test com
Page 5 and 6: Main Sub code code 5 01 Operation p
Page 7 and 8: Main Sub code code 8 01 Developing
Page 9 and 10: Main Sub code code 22 02 Maintenanc
Page 11 and 12: Main Sub code code 22 21 Scanner co
Page 13 and 14: Main code Sub code Contents Details
Page 15 and 16: Main Sub code code 26 43 Side void
Page 17: Main Sub code code 43 05 Fusing tem
Page 21 and 22: Main Sub code code 46 19 Exposure m
Page 23 and 24: Main Sub code code 46 32 Copier col
Page 25 and 26: Main Sub code code 49 01 Download m
Page 27 and 28: Main Sub code code 50 06 Copy lead
Page 29 and 30: Main Sub code code 51 02 Resist amo
Page 31 and 32: Main Sub code code 64 01 Self print
Page 33 and 34: Main Sub code code 66 05 Signal sen
Page 35 and 36: Main Sub code code 66 13 Dial test
Page 37 and 38: Main Sub code code 66 32 Receive da
Page 39 and 40: 5. Trouble codes A. Trouble codes l
Page 41: Main Sub code code Details of troub

[10] TEST COMMAND, TROUBLE CODES - OlsonBros

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?