[10] TEST COMMAND, TROUBLE CODES - OlsonBros

Main Sub
code code
64 01 Self print (1by2 mode)
(SELF PRT.)
66 01 FAX soft SW setting
(Executable only when the
FAX is installed.)
Contents Details of function/operation
02 FAX soft SW initializing
(excluding the adjustment
values) (Executable only
when the FAX is installed.)
[Function]
The status of the optical section is ignored and printing of one page is made. Also when the print command
is received from the host, printing is made.
When this test command is executed, warm-up is performed and the ready lamp is lighted. (Since,
however, the scanner is disabled, initializing is not made.)
Enter the code number and press [ENTER/START] key to start paper feed from the selected cassette
and print in the selected pattern.
Code number Pattern Display item
0 1by2 1 BY 2
1 Grid pattern CHECK
2 White paper WHITE
3 Black background BLACK
∗ For 4 – 99, flip.
[Operation]
The operation is similar to test command 21-01.
[Function]
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
[Operation]
1) Initial display
ENTER FAX SOFT SW. #
(3 DIGITS) SW.___
∗ [CLEAR] key: FAX control is terminated.
2) Enter a 3-digit value of soft SW No. (To
enter the fourth digit, shift to the left.), and
the press [ENTER] key.
No.### xxxxxxxx
CHANGE? 1:YES 2:NO
"xxxxxxxx" is the set content.
∗ Select 2: Returns to the soft SW No. entry display.
[Function]
Use to initializing FAX soft SW.
[Operation]
1) Initial display
INITIALIZED
After 2sec, FAX control is terminated.
3) Select 1
AR-168S/168D TEST COMMAND, TROUBLE CODES 10 - 31
No.### xxxxxxxx
USE # KEY 12345678
4) Change with 1-8 of [10KEY] and the press
[ENTER] key.
No.### xxxxxxxx
STORED? 1:YES 2:NO
"xxxxxxxx" is the set content.
∗ Select 2: Returns to the soft SW No. entry display.
5) Select 1
STORED
After 2sec, returns to "1) Initial display".