[10] TEST COMMAND, TROUBLE CODES - OlsonBros
[10] TEST COMMAND, TROUBLE CODES - OlsonBros
[10] TEST COMMAND, TROUBLE CODES - OlsonBros
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Main Sub<br />
code code<br />
46 19 Exposure mode setting (AE<br />
MODE)<br />
Contents Details of function/operation<br />
20 SPF exposure correction<br />
(EXP.LEVEL SPF) (Disabled<br />
when set to OC)<br />
[Function]<br />
<br />
When this test command is executed, the code number of the current set gamma table is displayed.<br />
(Default: Japan -1/Ex Japan -2)<br />
Enter the code number corresponding to the desired gamma table, and press [←/→] key to change<br />
the mode and write into the EEPROM.<br />
<br />
When setting the γ table, press [→] key to change to the AE operation mode, and the current set code<br />
number of the AE operation mode is displayed. (Default: 0)<br />
Enter the code number corresponding to the desired AE operation mode and press [←/→] key to<br />
change the mode and write into the EEPROM.<br />
<br />
When [→] key is pressed in AE operation mode setting, the mode is changed to the PHOTO image<br />
process setting and the code number of the current set PHOTO image process setting is displayed.<br />
(Default: 0)<br />
Enter the code number corresponding to the desired PHOTO image process setting and press [←/→]<br />
key to change the mode and write into the EEPROM.<br />
Mode Display item Code number Setting content Remark<br />
γ GAMMA<br />
1<br />
2<br />
Image quality priority mode<br />
Toner consumption priority mode<br />
Japan default<br />
EX Japan default<br />
AE AE<br />
0<br />
1<br />
Lead edge stop<br />
Real time process<br />
Default<br />
PHOTO PHOTO<br />
1<br />
2<br />
Error diffusion process<br />
Dither process<br />
Default<br />
[Operation]<br />
1) Initial display<br />
<br />
46-19 AE MODE<br />
GAMMA 2( 1-2)<br />
2) [→] Mode selection<br />
2) [←] Mode selection<br />
[Function]<br />
Used to adjust the exposure correction amount in the SPF mode. The adjustment is made by adjusting<br />
Vref voltage variation for the OC mode.<br />
When this test command is executed, the current set value is displayed in 2 digits (Default: 50).<br />
Change the set value and press [START] key to save the setting and make a copy.<br />
When the set value is increased, copy becomes darker. When the set value is decreased, copy<br />
becomes lighter. (Adjustment range: 1 – 99)<br />
[Operation]<br />
The operation is similar to test command 46-01.<br />
46-19 AE MODE<br />
AE 0( 0-1)<br />
46-19 AE MODE<br />
PHOTO 1( 1-2)<br />
Mode Display item Default Remark<br />
SPF SPF 50<br />
AR-168S/168D <strong>TEST</strong> <strong>COMMAND</strong>, <strong>TROUBLE</strong> <strong>CODES</strong> <strong>10</strong> - 21<br />
3) [<strong>10</strong>KEY] Value input<br />
46-19 AE MODE<br />
AE 1( 0-1)<br />
4) [ENTER/START] Save the<br />
set value. The machine<br />
goes to the sub code entry<br />
standby mode.