[10] TEST COMMAND, TROUBLE CODES - OlsonBros

Main Sub
code code
66 03 FAX PWB memory check
(Executable only when the
FAX is installed.)
Contents Details of function/operation
04 Signal send mode (Max.
value) (Executable only
when the FAX is installed.)
[Function]
Use to check the FAX PWB memory.
[Operation]
1) Initial display
SELECT CHECK MEMORY
PRESS ←, →
2) [←/→] or after 2sec
Every time when [→] key is pressed, the second line is changed in the sequence of No. 1 → 2 →
3 → 1.
When [←] key is pressed, the sequence is reversed.
SELECT MEMORY (1-3)
1:DRAM
∗ [CLEAR] key: FAX control is terminated.
3) [ENTER] key
CHECKING MEMORY
4) After completion of check
• When the result is OK
MEMORY CHECK RESULT
OK
• In case of sum check error
MEMORY CHECK RESULT
XXXXXXXX SUM NG
∗ [CLEAR] key: Returns to "1) Initial display".
[Function]
Use to set the signal send mode (Max. value).
Facsimile test command design specifications.
[Operation]
SELECT MEMORY (1-3)
2:SRAM
• In case of address bus check
error
MEMORY CHECK RESULT
XXXXXXXX A-BUS NG
• In case of data check error
MEMORY CHECK RESULT
XXXXXXXX DATA NG
AR-168S/168D TEST COMMAND, TROUBLE CODES 10 - 32
SELECT MEMORY (1-3)
3:FLASH
• In case of data bus check
error
MEMORY CHECK RESULT
XXXXXXXX D-BUS NG
• In case of erase check error
MEMORY CHECK RESULT
XXXXXXXX ERASE NG
1 NO SIGNAL 13 7200bps(V34) 25 2400bps(V27ter)
2 33600bps(V34) 14 4800bps(V34) 26 300bps(FLAG)
3 31200bps(V34) 15 2400bps(V34) 27 2100Hz(CED)
4 28800bps(V34) 16 14400bps(V33) 28 1100Hz(CNG)
5 26400bps(V34) 17 12000bps(V33) 29 300bps(V21)
6 24000bps(V34) 18 14400bps(V17) 30 2100Hz(ANSam)
7 21600bps(V34) 19 12000bps(V17) 31 DUMMY RING
8 19200bps(V34) 20 9600bps(V17) 32 NO VOICE ANSWER
9 16800bps(V34) 21 7200bps(V17) 33 NO RING BACK TONE
10 14400bps(V34) 22 9600bps(V29) 34 LINE OFF HOOK
11 12000bps(V34) 23 7200bps(V29) 35 LINE ON HOOK
12 9600bps(V34) 24 4800bps(V27ter)
1) Initial display
SELECT OUTPUT SIGNAL
(2 DIGITS) No.___
2) 2-digit (1-35) with [10KEY] / [←/→] / 2sec after
Pressing [→] key or [←] key reverses the sequence.
No. (1-35)
1:NO SIGNAL
∗ [CLEAR] key: FAX control is terminated.
3) [ENTER] key
Send after setting
OUTPUTING SIGNAL MAX
PRESS CLEAR TO STOP
∗ [CLEAR] key: Returns to "1) Initial display".
..... No. (1-35)
35:LINE ON HOOK