1 On the - Pitney Bowes Canada

More documents

Recommendations

Info

4-5 MAKING CONFIGURATION SETTING ■ Line thickness This setting is used to adjust the line width of vector graphics. For example, if you desire a finer line, select a value from 0 to 4. If you desire a thicker line, select a value from 6 to 9. To return to the standard line thickness, select 5. Use this setting for special applications such as CAD when lines do not appear with sufficient clarity. For regular applications, there is usually no need to change the setting. Default setting: 5 The relation between the setting values and the change of line thickness are as follows. Value 0 1 2 3 4 5 6 7 8 9 Thickness change 1dot *1 50% 75% 90% 95% 100% 105% 110% 125% 150% *1 All lines are 1-dot lines. PCL settings ■ PCL symbol set setting This setting is used to select which country's characters are used for certain of the symbols in the character code table of the PCL symbol set. (Use this setting when you need to select symbols that differ by country.) Default setting: "3" (PC-8) See page 7-4 for the symbol set settings. You can also print the "PCL SYMBOL SET LIST" in "LIST PRINT" (see page 2-15 of "Operation manual (for general information and copier operation)") for a table that shows correspondences between numeric values and symbol sets. ■ PCL font setting This setting is used to select the font for printing. Default setting: "0" (Courier) (resident font) If the optional extended font kit is installed, you can also select from these fonts. In addition, the "PCL INTERNAL FONT LIST" in "PRINTER TEST PAGE" of "LIST PRINT" (see page 2-15 of "Operation manual (for general information and copier operation)") can be printed. When the optional extended font kit is installed, the "PCL EXTENDED FONT LIST" can be printed. ■ PCL LINE FEED CODE This setting is used to select how the printer responds when a line break command is received. Default setting: 0.CR=CR; LF=LF; FF=FF ■ WIDE A4 When this setting is enabled, up to 80 characters can be printed on one line of A4 size paper using 10 CPI font (8 bit characters). When disabled, up to 78 characters can be printed. Default setting: Disabled PostScript settings This setting specifies whether an error page describing the cause of an error is printed or not when a PostScript error has occurred. Selections are available to choose printing or not printing of error pages. Default setting: Not print
CHAPTER 5 5-1 KEY OPERATOR PROGRAMS This chapter explains the key operator programs for the printer function. Key operators should read this chapter to ensure correct use of the key operator programs. Page KEY OPERATOR PROGRAMS.....................................................................5-2 ● Key operator program list.......................................................................5-2 ● Procedure for using key operator programs...........................................5-3 ● Key operator program menu ..................................................................5-4 DESCRIPTION OF SETTING PROGRAMS..................................................5-5 ● Printer settings .......................................................................................5-5 ● Network settings.....................................................................................5-7
Page 1 and 2: OPERATION MANUAL (for printer) DIGI
Page 3 and 4: TABLE OF CONTENTS CHAPTER 1 BASIC P
Page 5 and 6: SETTING THE PRINTER DRIVER This sec
Page 7 and 8: SETTING THE PRINTER DRIVER Printing
Page 9 and 10: SETTING THE PRINTER DRIVER Using op
Page 11 and 12: CHAPTER 2 SETTING THE PRINTER DRIVE
Page 13 and 14: 4 N-Up Printing Each page is reduce
Page 15 and 16: 7 [Punch] Use this to select the pu
Page 17 and 18: 4 Paper selection Select the paper
Page 19 and 20: Settings in the [Advanced] tab 2-9
Page 21 and 22: 8 9 10 Overlays This function is us
Page 23 and 24: 2 SELECTING PRINTING FUNCTIONS Sett
Page 25 and 26: Settings in the [Watermarks] tab 2-
Page 27 and 28: REMOTE OPERATION VIA A NETWORK You
Page 29 and 30: REMOTE OPERATION VIA A NETWORK 2 3
Page 31 and 32: REMOTE OPERATION VIA A NETWORK 8 Ne
Page 33 and 34: REMOTE OPERATION VIA A NETWORK Dire
Page 35 and 36: REMOTE OPERATION VIA A NETWORK 4 5
Page 37 and 38: MAKING CONFIGURATION SETTING The pr
Page 39: MAKING CONFIGURATION SETTING Printe
Page 43 and 44: Procedure for using key operator pr
Page 45 and 46: DESCRIPTION OF SETTING PROGRAMS The
Page 47 and 48: Network settings These programs are
Page 49 and 50: TROUBLESHOOTING The following probl
Page 51 and 52: TROUBLESHOOTING Checking the IP add
Page 53 and 54: PRINTER SPECIFICATIONS Memory capac
Page 55 and 56: PRINT AREA The print area of this p

1 On the - Pitney Bowes Canada

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?