Spot Vital Signs Service Manual - Frank's Hospital Workshop
Spot Vital Signs Service Manual - Frank's Hospital Workshop
Spot Vital Signs Service Manual - Frank's Hospital Workshop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Service</strong> <strong>Manual</strong> Introduction 5<br />
Temperature warnings<br />
IR communications port warnings<br />
General cautions<br />
WARNING Single-use, disposable probe covers, available from Welch Allyn, limit<br />
patient cross-contamination. The use of any other probe cover or the failure to<br />
use a probe cover may produce temperature errors and is specifically not<br />
recommended.<br />
WARNING Use only oral probes (blue cap) for taking oral and axillary<br />
temperatures. Use only rectal probes (red cap) for taking rectal temperatures. The<br />
use of the wrong probe may produce temperature errors.<br />
WARNING Do not allow the tip of the temperature probe to come into contact<br />
with any heat source (e.g., hands or fingers) prior to taking a temperature<br />
measurement. If this occurs, discard the probe cover and start the temperature<br />
determination again.<br />
WARNING Long-term continuous monitoring beyond three to five minutes is<br />
not recommended in any mode.<br />
WARNING The Welch Allyn <strong>Spot</strong> <strong>Vital</strong> <strong>Signs</strong> contains an infrared<br />
communications port for isolated communications with external devices. The port<br />
is located on the side of the device to preclude direct eye contact on a continual<br />
basis when viewing the display. As a precaution, do not look directly into the<br />
infrared port during operation.<br />
A caution statement in this manual identifies a condition or practice, which if not<br />
corrected or discontinued immediately, could lead to equipment failure, equipment<br />
damage, or data loss.<br />
Caution If the accuracy of any measurement is in question, check the patient's<br />
vital sign(s) by an alternate method, then check to make sure the device is<br />
functioning properly.<br />
Caution Ensure the device is placed on a secure surface or use one of the<br />
optional mounting accessories.<br />
Caution Do not place fluids on the device.