Spot Vital Signs Service Manual - Frank's Hospital Workshop

Service Manual Overview 15
LCD (liquid crystal display)
Option no longer available.
Date/Time: indicates that the
user must set/re-set the
current date and time.
Measurement Indicator:
displays the blood
pressure, SpO2, or
temperature icon as Spot
Vital Signs is taking the
respective measurement.
Thermometer Mode icon:
shows temperature mode (for
devices with SureTemp only).
The LCD may indicate any of the following: systolic blood pressure (mmHg or kPa),
diastolic blood pressure (mmHg or kPa), temperature (°F or °C), thermometer mode,
pulse rate, pulse signal level, SpO 2, MAP (mmHg or kPa), and battery charge level.
.
Temperature Probe Problem:
indicates a temperature probe problem
(for devices with SureTemp only).
SYS mmHg
DIA mmHg
SpO2 %
/ min
Battery Charging: indicates the device is
powered through the AC power transformer.
M P
Systolic and Diastolic display:
if MAP is turned on, the screen
toggles between the systolic and
diastolic values, and the word
“MAP” and the MAP value.
SpO 2 Display: shows the percent saturation of arterial
hemoglobin (for devices with SpO 2 only).
Pulse Display: shows the pulse rate.
Temperature Display and Indicator: shows the
temperature in Fahrenheit or Celsius (for devices with
SureTemp only).
Monitor Mode Temperature: indicates the thermometer is
in Monitor Mode (for devices with SureTemp only).
Out-of-range indicator: shows the patient’s temperature
reading above or below the measurement range limits (for
devices with SureTemp only).
Icon not used.
Battery Level indicator: displays the battery charge level.