User's Manual ND 281, NDP 281 - heidenhain - DR. JOHANNES ...

RS-232-C/V.24 Interface (X31)
32
Operating parameters for measured value output
Parameter Function
Baud rate
Number of additional blank lines for
measured value output
Display freeze during measured value output
In operating parameter P23, you can specify how the
measured value output signal will affect the display unit.
Display freeze during measured value outputP23
Concurrent display, no display freeze:
The display value is the current measured value
Frozen display: Display is stopped
(frozen) and updated by every
measured value output signal
Frozen/concurrent display: Display is
frozen as long as a measured value output
signal is present
To output measured values with the PRINT function:
➤ Press MOD repeatedly,
until the indicator PRINT blinks.
➤ Start measured value output with ENT.
Duration of measured value transfer
187 + (11 number of blank lines)
tD = [s]
baud rate
Indicator preselection
Operating parameter P86 allows you to define which indicator
is displayed first when MOD is pressed.