User's Manual ND 281, NDP 281 - heidenhain - DR. JOHANNES ...

RS-232-C/V.24 Interface (X31)
34
Measured value output after signal “STX” (Ctrl B)
If the display unit receives the control character STX (Ctrl B)
over the RS-232-C/V.24 interface (X31), it outputs the current
measured value over the interface.
➤ Transfer the control character Ctrl B over the RXD line of
the RS-232-C/V.24 interface (X31).
Characteristic times for measured value output
Process Time
Storage delay t1 ≤ 1ms
Measured value output after t 2 ≤ 22 ms
Regeneration time t 3 ≥ 0
These times are prolonged if functions are active
(for example, series of measurements with DIFF
value display).
Duration of measured value transfer
t
187 + (11 number of blank lines)
D = [s]
baud rate
10 L%=17
20 CLS
30 PRINT "V.24/RS-232-C"
40 OPEN "COM1:9600,E,7" AS#1
50 PRINT #1, CHR$ (2);
60 IF INKEY$""THEN 130
70 C%=LOC(1)
80 IF C%