downloaded - Goldmund

6 BACK PANEL CABLE CONNECTIONS
(Ctd.)
Connecting Connecting Connecting to to a a Receiver/Amplifier Receiver/Amplifier with with 7.1ch/5.1ch
7.1ch/5.1ch
Audio Audio Input
Input
Please use 8 interconnect cables to connect the FRONT-L (Front Left), FRONT-R
(Front Right), SURR-L (Surround Left), SURR-R (Surround Right), Center, SUB
(SubWoofer), REAR-L (Surround Back Left) and REAR-R (Surround Back Right),
analog output terminals of the Eidos Reference Blue to the corresponding multichannel
analog audio input jacks of your A/V receiver or amplifier. If the A/V receiver
or amplifier only has 5.1ch audio input, the REAR-L (Surround Back Left) and
REAR-R (Surround Back Right) terminals do not need to be connected.
Goldmund recommends that the greatest care is taken when selecting the cable
linking the player to the D/A converter or the preamplifier. The very accurate
signal provided by the Eidos Reference Blue can easily be ruined by an imperfect
connection. Use a "Goldmund Lineal" cable from the coaxial output if you want
to achieve the most accurate jitter-free connection for CD playback
Connecting Connecting to to to a a Stereo Stereo Audio Audio Audio System System
System
If your audio system only offers stereo audio inputs, or if you would like to connect a
dedicated stereo system in addition to the surround system, you can connect it to
the LEFT-STEREO-RIGHT audio output terminals of the player.
NOTE
NOTE
The STEREO AUDIO OUT terminals will always provide a down-mixed stereo signal
from multi-channel sources. The “Down Mix” and other speaker settings in the Audio
Processing Setup Menu do not affect the STEREO AUDIO OUT.
GOLDMUND EIDOS REFERENCE BLUE – Blu-Ray Player - 11