downloaded - Goldmund

More documents

Recommendations

Info

special “Source Direct” output resolution on its HDMI output. This resolution is recommended for use with external video processors or high-end TVs. 7 SETTING UP THE DISPLAY SYSTEM (Ctd.) In “Source Direct” mode, the player works as a “transport”. It decodes video from the discs and then sends the raw video signal in its native resolution and format, without extra processing, to the external video processor or TV. Depending on your selection of “Primary Video Output”, the available output resolution selections will differ. For the HDMI output, the following output resolutions are available: Auto, 1080p, 1080i, 720p, 480p/576p, 480i/576i, and Source Direct. If signal resolution that the TV can display. For the component output, the following output resolutions are available: 1080i, 720p, 480p/576p and 480i/576i. Please refer to the specification of your TV to find the best resolution to use. Press the UP/DOWN ARROW buttons to select the desired output resolution, then press the ENTER button. The player will apply the selected output resolution and ask you to confirm the selection. If your TV supports the selected resolution, you will see a “OK” option and press the ENTER button to save the resolution setting. If your TV does not support the selected resolution, you may see a black screen or an error message. In this case please wait for 15 seconds and the Easy Setup screen will reappear. Select a different resolution that your TV can support. GOLDMUND EIDOS REFERENCE BLUE – Blu-Ray Player - 15
7 SETTING UP THE DISPLAY SYSTEM (Ctd.) NOTE NOTE • In case you are not able to get a picture using the HDMI or component output, please connect the player to the TV using the composite video output, and then use the Setup Menu to adjust the player settings. • Video up-conversion over the component output is only available for unencrypted discs such as home video and consumer-created contents. Most commercially pressed DVD discs are CSS-encrypted and will be limited to 480i/480p resolution. This restriction applies to the component output only. The HDMI output is protected with HDCP and has no such restriction. Determine Determine the the Display Display Aspect Aspect Ratio Ratio GOLDMUND EIDOS REFERENCE BLUE – Blu-Ray Player - 16
Page 1 and 2: USER MANUAL GOLDMUND EIDOS REFERENC
Page 3 and 4: Table of Contents 1 FEATURES & COMP
Page 5 and 6: 1 FEATURES & COMPATIBILITY 1.1 COMP
Page 7 and 8: 3 POWER SUPPLY VOLTAGE SELECTION Th
Page 9 and 10: 6 BACK PANEL CABLE CONNECTIONS (Ctd
Page 11 and 12: 7 SETTING THE DISPLAY SYSTEM Access
Page 13: 7 SETTING UP THE DISPLAY SYSTEM (Ct
Page 17 and 18: 7 SETTING UP THE DISPLAY SYSTEM (Ct
Page 19 and 20: 8 BASIC OPERATIONS 8.1 PLAYING VIDE
Page 21 and 22: NOTE NOTE NOTE If the screen saver
Page 23 and 24: Note Note In addition to the playba
Page 25 and 26: NOTE NOTE •This function is avail
Page 27 and 28: NOTE NOTE •Pure Audio mode is aut
Page 29 and 30: 9 SETTINGS (Ctd.) To access the pla
Page 31 and 32: 9 SETTINGS (Ctd.) Angle Mark (on/of
Page 33 and 34: NOTE NOTE Do not select “Multi-sy
Page 35 and 36: 9 SETTINGS (Ctd.) HDMI Options: To
Page 37 and 38: 9 SETTINGS (Ctd.) CUE-Correction: T
Page 39 and 40: 9 SETTINGS (Ctd.) • Use the UP/DO
Page 41 and 42: 12 TECHNICAL SPECIFICATIONS COMPATI
Page 43: 13 REMOTE CONTROL NOTE NOTE The rem

downloaded - Goldmund

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?