H19 - User Manual - Electronic Reading Systems Ltd.

98
Chapter . Bluetooth Connections
. Select the service to use from the device, and tap Finish.
Once you create a partnership, the Bluetooth-enabled devices don't need to be visible to
beam information between them; Bluetooth needs only to be turned on.
5.3 Beaming Information (Bluetooth)
Receiving Beamed Information
1. Tap > Settings > Connections tab > Beam.
. Select Receive all incoming beams.
. To receive beams by using Bluetooth, ensure Bluetooth is turned on
and that your phone is discoverable and within close range.
. Tap .