REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.

RS232: Send a stream to the HOST or SERIAL port:
TEXT
DELAY
RESPONSE
STOP ON DELAY EXPIRED: Used if delay is not to zero.
YES: Stop the marking cycle if « REPONSE » string is not received on time.
NO : go on whatever the « REPONSE » string .
TEXT: Text to be sent: In this text it is possible to insert one or several variables (
HOST PORT: Yes/No choice of Serial port or Host port
DELAY: maximum time in millisecond to wait for the response
RESPONSE: Text to wait for: Variable can be add to this text (
+ )
HOME POSITION: Enables to run an origin cycle within a marking file:
AXIS: Choice of the axis that returns to origin for checking
I/O SETTING: Input/output management :
STOP ON DELAY EXPIRED: Used if delay is not to zero.
YES: Stop the marking cycle if « REPONSE » string is not received on time.
NO : go on whatever the « REPONSE » string.
OUTPUT, VALUE : Number of output and value to be assigned
DELAY : Maximum activation time
UNSET OUTPUT : Return of output to initial state after timeout
INPUT, VALUE : Number of input and value to be tested
+ )
Operation: Output assignments (if the parameters have been adjusted)
Until this timeout (if adjusted) has elapsed or the input (if specified) changes to the desired state.
ROTATION: machines equipped with a D axis
Carries out angular rotation:
X
SPEED
SENDNG STRING ON RS232
STOP ON DELAY EXPIRED
HOME POSITION EDITION
HOST PORT
CHANGE TO XY: Clears the head in XY before carrying out a rotation
INPUT/OUTPUT LINE EDIT
STOP ON DELAY EXPIRED
OUTPUT VALUE ON
DELAY UNSET OUTPUT OUI
INPUT VALUE ON
NOTREFE8V5US – R01 32/51
AXIS
ROTATION EDITION
Y
ANGLE
CHANGE TO XY