REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.
REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.
REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
c) « MARKER » connector<br />
This is a female SUB D 25 pin connector<br />
Pin No Signal name Function<br />
1,2,14,15 styl+ Stylus power supply / solenoid (positive control)<br />
22,23,24,25 styl- Stylus power supply / solenoid (negative control)<br />
3 Input 8 Auto-sensing input<br />
4 Y_MOTOR_A+ Y axis stepper motor phase control<br />
5 Y_MOTOR_A- Ditto<br />
6 Y_MOTOR_B+ Ditto<br />
7 Y_MOTOR_B- Ditto<br />
8 Y_MOTOR_A+ X axis stepper motor phase control<br />
9 Y_MOTOR_A- Ditto<br />
10 Y_MOTOR_B+ Ditto<br />
11 Y_MOTOR_B- Ditto<br />
12 MARCHE_NO Engraving control<br />
13 GND<br />
16 ULAN S.I.C bus<br />
17 “5V external” power supply<br />
18 GND<br />
19 GND<br />
20 ORG_X Detection of X axis origin<br />
21 ORG_Y Detection of Y axis origin<br />
d) « ACCESORY » connector<br />
This is a female SUB D 15 pin connector<br />
Pin No Signal name Function<br />
1 Z_MOTOR_A+ Z axis stepper motor phase control<br />
2 Z_MOTOR_A- Ditto<br />
3 Z_MOTOR_B+ Ditto<br />
4 Z_MOTOR_B- Ditto<br />
5 GND<br />
6 GND<br />
7 ORG_Z Detection of Z axis origin<br />
8 +5V_EXT “5V external” power supply<br />
9 T1_GND GND transistor output<br />
10 T1_COLL Transistor collector output<br />
11 T1_PWR Ext power supply input transistor output<br />
12 GND_24V Ground 24V load<br />
13 GND_24V Ditto<br />
14 +24V EXT +24V load<br />
15 NC NC<br />
NOTREF<strong>E8</strong><strong>V5</strong>US – R01 42/51