REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.

More documents

Recommendations

Info

Cycle start Cycle underway End of marking c) Operating timing diagram During the marking cycle the controller outputs are activated as follows: Start of cycle : The « contoller ready » output changes to the inactive state The current cycle output changes to the active state Last marked point: The last marked point output changes to the active state Return to origin The last marked point output changes to the inactive state The current cycle output changes to the inactive state The « Controller ready » output changes to the active state Error during cycle: The « Fault » output changes to the active state The current cycle output changes to the inactive state The last marked point output changes to the active state The ready controller output remains inactive. Validation of pause message: The machine returns to the origin then, The current cycle output changes to the inactive state The « controller ready » output changes to the active state The « Fault » output changes to the active state Pause during cycle: The « Pause » output changes to the active state Validation of pause message: The « Pause » output changes to the inactive state In a standard configuration The current cycle output is output 1 The last marked point output is output 2 The “default” output is output 3 The “pause” output is output 4 The “Controller ready” output is output 5 Waiting for new cycle File selection: position inputs Marking cycle Pulse of 250ms minimum Last impact Return to machine origin Waiting for next cycle NOTREFE8V5US – R01 44/51
10 - Cabling examples a) Wiring of the pneumatic Z-axis Marking controller Static relay output Input 7 Common of inputs Input 8 +24V 7 9 8 27 29 Use of an electro-pneumatic electro-valve with a solenoid (24V DC) which needs less than 500mA. End-of-stroke Withdrawn position End-of-stroke Marking position Approach jack NOTREFE8V5US – R01 45/51
Page 1: SIC MARKING 13 route de Limonest ZA
Page 4 and 5: 3 - DATA-MATRIX FORMAT.............
Page 6 and 7: - Entry fields In the active field
Page 8 and 9: 1 - FILE menu FILE VAR. MARKING CON
Page 10 and 11: DEFAULT SETTINGS REG Change to conf
Page 12 and 13: 3 - MARKING Menu FILE VAR. MARQUAGE
Page 14 and 15: 4 - CONFIGURATION Menu FILE VAR. MA
Page 16 and 17: PASSWORD SUP: Adjustment of passwor
Page 18 and 19: SCALE 1:1 : The graphic view is to
Page 20 and 21: STATE OF I/O: Caution, the ready ou
Page 22 and 23: 3 - Accessory parameters ( ): The c
Page 24 and 25: Subsequently, in the parameter edit
Page 26 and 27: 6 - Parameters of marking cycle ( +
Page 28 and 29: 4 - EDIT Menu FIle EDIT MARK. FORMA
Page 30 and 31: 5 - MARKING Menu FICH EDIT MARQ. FO
Page 32 and 33: RS232: Send a stream to the HOST or
Page 34 and 35: VI - APPENDIXES 1 - QUALITY OF MARK
Page 36 and 37: ) Orientation = Vertical •Straigh
Page 38 and 39: 3 - Data-matrix format Square forma
Page 40 and 41: 7 - Description of serial ports a)
Page 42 and 43: c) « MARKER » connector This is a
Page 46 and 47: ) Use of the inputs/outputs with cl
Page 48 and 49: ARIAL FONT The ARIAL font is a spac
Page 50 and 51: OCR FONT NOTREFE8V5US - R01 50/51

REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.

Create successful ePaper yourself

Delete template?

Save as template?