REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.

More documents

Recommendations

Info

- Entry fields In the active field (in this case zone Y), the field is in reverse video and a cursor flashes at the insertion point. The fields followed by arrows: (as for the Speed field) are list type fields: - the and arrows are used for scrolling through this list and the + key displays it: - another key starts the search using the first character in the list If the key is pressed, the cursor changes from a straight line: to a block: indicating change from the character insertion mode to the character replacement mode. The fields whose size exceeds that of the display on the screen are displayed as follows: - Adjustment of passwords: there are two levels of protection: Programmer and Supervisor.. PROindicates that the programmer password is necessary to gain access to the described function SUP indicates that the Supervisor password is necessary to gain access to the described function Refer to page 16 to define the passwords EDITION LIGNE DE TEXTE X Y W H FORCE TEXT QUALITY Dbl. FONT SPEED ANGLE RADIUS X EDITION LIGNE DE TEXTE Y FORCE TEXT QUALITY Dbl. FONT SPEED ANGLE The controller starts up with the operator access. If the password fields for Programmer and Supervisor are empty, the operator will freely access all areas of the software. Report to page 13 to change the log-in under a different type of user to restrict or access to other areas of software. NOTREFE8V5US – R01 6/51
Here is the controller start-up welcoming screen: V5-3-1 (2005-02-20) 3 Axis II - STARTING SCREEN The first element indicates the program version number. The program creation date (Year – Month – Day) is indicated in brackets. The last element: Axis indicates whether the controller has a 3rd axis card. At the end of startup, the controller switches to the marking mode (see next page). Starting key management: 5 times machine WORKSs configuration 5 times change to RS232 mode alone Once No current in motors on starting NOTREFE8V5US – R01 7/51
Page 1: SIC MARKING 13 route de Limonest ZA
Page 4 and 5: 3 - DATA-MATRIX FORMAT.............
Page 8 and 9: 1 - FILE menu FILE VAR. MARKING CON
Page 10 and 11: DEFAULT SETTINGS REG Change to conf
Page 12 and 13: 3 - MARKING Menu FILE VAR. MARQUAGE
Page 14 and 15: 4 - CONFIGURATION Menu FILE VAR. MA
Page 16 and 17: PASSWORD SUP: Adjustment of passwor
Page 18 and 19: SCALE 1:1 : The graphic view is to
Page 20 and 21: STATE OF I/O: Caution, the ready ou
Page 22 and 23: 3 - Accessory parameters ( ): The c
Page 24 and 25: Subsequently, in the parameter edit
Page 26 and 27: 6 - Parameters of marking cycle ( +
Page 28 and 29: 4 - EDIT Menu FIle EDIT MARK. FORMA
Page 30 and 31: 5 - MARKING Menu FICH EDIT MARQ. FO
Page 32 and 33: RS232: Send a stream to the HOST or
Page 34 and 35: VI - APPENDIXES 1 - QUALITY OF MARK
Page 36 and 37: ) Orientation = Vertical •Straigh
Page 38 and 39: 3 - Data-matrix format Square forma
Page 40 and 41: 7 - Description of serial ports a)
Page 42 and 43: c) « MARKER » connector This is a
Page 44 and 45: Cycle start Cycle underway End of m
Page 46 and 47: ) Use of the inputs/outputs with cl
Page 48 and 49: ARIAL FONT The ARIAL font is a spac
Page 50 and 51: OCR FONT NOTREFE8V5US - R01 50/51

REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?