REFERENCE MANUAL E8-V5 - SIC-Venim s.r.o.

- Entry fields
In the active field (in this case zone Y), the field is in reverse video and a cursor flashes at the insertion point.
The fields followed by arrows: (as for the Speed field) are list type fields:
- the and arrows are used for scrolling through this list and the + key displays it:
- another key starts the search using the first character in the list
If the key is pressed, the cursor changes from a straight line: to a block: indicating
change from the character insertion mode to the character replacement mode.
The fields whose size exceeds that of the display on the screen are displayed as follows:
- Adjustment of passwords: there are two levels of protection: Programmer and Supervisor..
PROindicates that the programmer password is necessary to gain access to the described function
SUP indicates that the Supervisor password is necessary to gain access to the described function
Refer to page 16 to define the passwords
EDITION LIGNE DE TEXTE
X Y W H
FORCE
TEXT
QUALITY Dbl. FONT
SPEED ANGLE RADIUS
X
EDITION LIGNE DE TEXTE
Y
FORCE
TEXT
QUALITY Dbl. FONT
SPEED ANGLE
The controller starts up with the operator access. If the password fields for Programmer and Supervisor are empty, the
operator will freely access all areas of the software.
Report to page 13 to change the log-in under a different type of user to restrict or access to other areas of software.
NOTREFE8V5US – R01 6/51