Linear Way L

Table 10.2 Standard and maximum lengths of stainless steel track rails (Wide rail type)
n(Number of
mounting holes)
2n(Number of
mounting holes)
Item
E
F
Standard lengthLn
Pitch of mounting holes F
E
Standard range
of E ( 1 )
Maximum length( 2 )
Pitch of mounting holes F
L
Model number
Maximum number of butt-jointing track rails
Maximum length of butt-jointing track rails
Item
Model number
Standard lengthLn
E
Standard range
of E ( 1 )
Maximum length( 2 )
incl.
under
incl.
under
Maximum number of butt-jointing track rails
Maximum length of butt-jointing track rails
E
LWLF 42B
LWLF 42
unit : mm
LWLF 10 … B LWLF 14 … B
LWLF 4 LWLF 6 LWLF 14
40(4) 60(4) 60( 3) 90( 3)
60(6) 90(6) 80( 4) 120( 4)
70(7) 105(7) 120( 6) 150( 5)
80(8) 120(8) 160( 8) 180( 6)
100(10) 150(10) 220(11) 240( 8)
280(14) 300(10)
10 15 20 30
5 7.5 10 15
3.5 4.5 4.5 5.5
8.5 12 14.5 20.5
180 240 300 300
(300) (300) (500) (990)
7 8
1 840 1 950
LWLF 18 … B LWLF 24 … B LWLF 30 … B LWLF 42 … B
LWLF 18 LWLF 24 LWLF 42
90( 3) 120( 3) 160( 4) 160( 4)
120( 4) 160( 4) 240( 6) 240( 6)
150( 5) 240( 6) 320( 8) 320( 8)
180( 6) 320( 8) 440(11) 440(11)
240( 8) 400(10) 560(14) 560(14)
300(10) 480(12) 680(17) 680(17)
30 40 40 40
15 20 20 20
5.5 6.5 6.5 6.5
20.5 26.5 26.5 26.5
690 680 680 680
(1 860) (1 960) (2 000) (2 000)
3 3 3 3
1 920 1 840 1 840 1 840
Note( 1 ) : Not applicable to the track rail with stopper pins (/S).
( 2 ) : The track rails of LWLF 4, LWLF 6 and LWLFB can be manufactured up to the maximum lengths shown in parentheses.
Consult for further information.
Remark 1 : The above table shows representative model numbers but is applicable to all models of the same size.
2 : "Maximum number of butt-jointing track rails" and "Maximum length of butt-jointing track rails" do not apply to the track rails of
interchangeable specification and tapped rail specification.
1N=0.102kgf=0.2248lbs.
1mm=0.03937inch
153