Linear Way L

Lubrication
Corrosion prevention
Capillary plate /Q Black chrome surface treatment /L
Re-lubrication interval can be made longer and
maintenance time and cost can be saved by
incorporating this lubrication part.
U.S. PATENT No. 6,190,046
No. 6,176,617
No. 6,082,899
No. 5,967,667
A black chrome permeable film is formed on the
track rail or slide unit surface to improve corrosion
resistance.
Fluorine black chrome surface treatment /LF
Fluorine resin coating is performed on top of the
black chrome permeable film for further
improvement in corrosion resistance. This
treatment also effectively prevents foreign matter
from adhering to the surface.
U.S. PATENT No. 5,564,188
No. 5,374,126
Others
Clean Environment Grease CG2
This grease is used for low dust generation in
clean rooms. Tube type TG120/CG2 (120g) and
miniature grease injector type MG10/CG2 (10g)
are available.
With stainless steel end plates /BS
The end plates are replaced with stainless steel
end plates.
With seals for special environment /RE
The end seals and under seals are changed to
seals for special environment that can be used at
high temperatures. For use at high temperatures,
this specification is combined with the
specification "with stainless steel end plates"
(/BS) and/or "specified grease" (/YCG).
Others
When special grease is required for vacuum or
high temperature, consult for information.
The photo shows a combined specification of "with seals for special
environment" (/RE) and "with stainless steel end plates" (/BS).
1N=0.102kgf=0.2248lbs.
1mm=0.03937inch
73